BANDA BD400.4 2OHM CAR AUDIO 400W 4CHANNELS 400X4 AMPLIFIER BANDA AUDIOPARTS The 400.4 offers 400Wrms with a configuration of 4 channels of 100Wrms at 2 Ohms each, or 2 channels of 200Wrms 4 Ohms in Bridge. This line is widely used for small systems as it accepts various installation configurations, meeting the most diverse market needs, playing any type of loudspeaker, from Subwoofers to Tweeters. You can equip your mini sound system to ensure daily quality in your tracks. Therefore, the product offers 4 channels with an impedance of 2 ohms and active crossover, in addition to a modern design with a black housing on top. - Operation Class: D - Maximum Power 12.6v @ 2 Ohms: 4 x 100 WRMS - Max Power 12.6v @ 4 Ohms: 4 x 65 WRMS - Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 200 WRMS - Max Power 14.4v @ 2 Ohms: 4 x 140 WRMS - Max Power 14.4v @ 4 Ohms: 4 x 85 WRMS - Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 280 WRMS - Key Active Crossover - Frequency Response: 20Hz to 20kHz - Low Pass LPF: 20Hz - 90Hz @ 12dB/8th - High Pass HPF: 90Hz - 20kHz @ 12B/8A - Band Pass (Flat) - THD: <1% - Input Voltage: 9 - 16V - Recommended fuse: 30A - Maximum Music Consumption: 20A - Power Cables (Min.): 10mm / 9 AWG - Output Cables (Min.): 2 x 1.5mm / 2 x 15 AWG - Signal Noise Ratio > 85dB - Input Sensitivity: 180mV - 3.4V - Input Impedance: 47K Ohms - Weight (Kg): 0.78 - Height (mm): 116 - Width (mm): 127 - Depth (mm): 53 NOTE: Installation of Banda Audioparts Amplifiers must always be carried out by a trained professional.

Read more less

The BD800.4 offers 800Wrms with a 4-channel configuration of 200Wrms at 2 Ohms each, or 400Wrms at 4 Ohms on each Bridge. This line is widely used for small and medium-sized systems as it accepts various installation configurations, meeting the most diverse needs of the market, playing any type of speaker.TECHNICAL SPECIFICATIONS• Maximum Power 14.4v @ 2 Ohms: 4 x 230 WRMS• Maximum Power 14.4v @ 4 Ohms: 4 x 150 WRMS• Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 460 WRMS• Maximum Power 12. 6v @ 2 Ohms: 4 x 200 WRMS• Maximum Power 12.6v @ 4 Ohms: 4 x 120 WRMS• Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 400 WRMS• Efficiency @ 4 Ohms: 82%• Efficiency @ 2 Ohms: 78%• Input Voltage: 9 - 16V• Input Impedance: 47k Ohms• THD+N: 1.5%• Input Sensitivity: 250mV - 3.4V •Signal to Noise Ratio: 85dB •Frequency Response: 20 to 20kHz (-3dBs)• HPF (Subsonic): 90Hz to 20kHz @ 12dBs/8° Linkwitz-Riley• LPF (Crossover): 20Hz to 90Hz @ 12dBs/8° Linkwitz-Riley• Recommended Fuse: 50 A• Resting Current : 700mA• Maximum Current (sine signal): 80 A• Maximum Current (musical signal): 40 A• Power Cables (min. recommended): 10mm• Output Cables (min. recommended): 2 x 1.5mm / 2 x 15 AWG• Weight (Kg): 0.82• Height (mm): 116• Width (mm): 127• Depth (mm): 53RECOMMENDATIONS BEFORE PURCHASECheck the product's compatibility with your equipment to avoid problems when using! Please check this with your installer or contracted professional before purchase.Check the voltage, power, impedance and other details that could make the installation unfeasible or cause damage to the product or the vehicle or equipment not covered by the warranty.For products that require installation, this must be done by a qualified professional. We are not responsible for misuse or incorrect installation carried out by the user or another unqualified person.

Read more less

DSP BASS Series – 2 Ohms VersionSmart Power, Precision Protection The DSP BASS 2 Ohms amplifier features a built-in limiter, offering greater safety and efficiency for your audio system. Unlike external limiters, the integrated design ensures stable protection even during voltage drops, making the system more secure and precise while helping to prevent speaker damage and reduce power consumption. This model offers three selectable limiter levels—1%, 5%, and 10%, easily adjusted via a tactile switch, giving users control over dynamics and thermal protection. With 3200 WRMS @ 2 Ohms, a Bass Boost (30Hz to 80Hz) of up to +12dB, and precision HPF/LPF filtering, this amplifier is engineered to deliver powerful and controlled low-frequency performance. Its durable aluminum chassis and advanced protection systems (thermal and short-circuit) ensure reliability, even under high-demand conditions. Technical Specifications – DSP BASS 2 Ohms Maximum Power @ 12.6V / 2 Ohms: 1 x 3200 WRMS Maximum Power @ 12.6V / 4 Ohms: 1 x 1700 WRMS Efficiency: 83% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: Minimum 1.5%, Maximum 7.5% Input Sensitivity: 300mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22Hz – 1000Hz Bass Boost: 30Hz – 80Hz (0 to +12dB) HPF (Subsonic Filter): 22Hz – 65Hz LPF (Crossover): 80Hz – 250Hz Limiter Levels: Selectable – 1%, 5%, or 10% Recommended Fuse: 150A Idle Current Draw: 2.5A Maximum Current Draw (musical signal): 220A Maximum Current Draw (sine signal): 440A Recommended Power Cable (min.): 50mm² Weight: 3.7kg (8.16 lbs) Height: 63mm (2.48 in) Width: 225mm (8.86 in) Depth: 236mm (9.29 in) Additional Information All products come with official invoice 1-year manufacturer warranty Orders ship within 24 business hours Images are for illustrative purposes only Professional installation is highly recommended. We are not responsible for damage due to incorrect installation or misuse.

Read more less

DSP BASS Series – Intelligent Power and Protection for Your Subwoofers The DSP BASS line stands out for its integrated limiter, which brings superior protection, precision, and efficiency to your audio system. Unlike external processors, the internal limiter maintains stable protection levels regardless of voltage fluctuations, helping to prevent speaker damage and reduce energy consumption. Users can select between three limiter levels—1%, 5%, and 10%—via a tactile switch, offering flexible control over dynamics and system safety. This amplifier delivers an impressive 3500 WRMS @ 1 Ohm and comes equipped with advanced features such as a variable Bass Boost, Subsonic HPF, and LPF Crossover. Housed in a solid aluminum chassis, it combines high performance with robust protection, including thermal and short-circuit safeguards. With its intelligent design and cutting-edge protection technology, the DSP BASS amplifier is ideal for serious bass enthusiasts looking for clean, controlled, and reliable power. Technical Specifications – DSP BASS Series Maximum Power @ 12.6V / 1 Ohm: 1 x 3500 WRMS Maximum Power @ 12.6V / 2 Ohms: 1 x 2100 WRMS Efficiency: 76% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: Minimum 1.5%, Maximum 7.5% Input Sensitivity: 300mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22Hz – 1000Hz Bass Boost: 30Hz – 80Hz (0 to +12dB) HPF (Subsonic Filter): 22Hz – 65Hz LPF (Crossover): 80Hz – 250Hz Limiter Levels: Selectable – 1%, 5%, or 10% Recommended Fuse: 150A Idle Current Draw: 2.5A Maximum Current Draw (musical signal): 220A Maximum Current Draw (sine signal): 440A Recommended Power Cables (min.): 50mm² Weight: 3.7kg (8.16 lbs) Height: 63mm (2.48 in) Width: 225mm (8.86 in) Depth: 236mm (9.29 in) Additional Information All products include official invoice 1-year manufacturer warranty Shipping within 24 business hours Images for illustrative purposes only Professional installation is strongly recommended. We are not responsible for damage caused by improper installation or misuse.

Read more less

Dynamic Power 2000.4 - Unparalleled Performance and Versatility Unleash the extraordinary with the Dynamic Power 2000.4 amplifier from Banda Audioparts, a true pioneer in the audio world. Standing as the sole amplifier line globally to feature the revolutionary power transfer function between channels, this innovation allows a seamless transfer of up to 60% between channels via a user-friendly app. Elevating convenience further, it incorporates an automatic gain structure, streamlining installation for a faster and easier setup. Fueled by a potent DSP, the amplifier now integrates an advanced Bluetooth processor. Dive into an array of features, including crossover, delay, equalization, channel routing, gains, and bridged/stereo selection. Delivering a commanding 2000 Watts RMS across 4 channels with an impedance range of 1 or 2 Ohms per channel, this amplifier showcases remarkable versatility, accommodating diverse installations with a single unit. Key Features: Power Transfer: Exclusive function for seamless channel power distribution Automatic Gain Structure: Simplifying installation for enhanced user convenience Integrated Bluetooth Processor: Elevates functionality with advanced DSP features Versatile Configuration: Suitable for Subwoofers, Woofers, Mid-Bass, Horns, or Super Tweeters Full-Range Frequency Response: Accommodates any audio project with ease Intuitive App: Configure the internal processor in real-time via Smartphone or Tablet Technical Specifications: 1 Ohm Configuration: Maximum Power 14.4v @ 1 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 2 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 2 Ohms Configuration: Maximum Power 14.4v @ 2 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 Comments: 1-year warranty by the manufacturer Illustrative images for representation only Professional installation recommended; not responsible for poor installation or product misuse.

Read more less

Banda Electra Bass 10K Amplifier Module Power 1 Ohm - 10.000 Watts RMS 2023 The ELECTRA line represents the perfect fusion of power and audio quality for lovers of deep, immersive bass. This amplifier module has been meticulously designed to provide an unparalleled audio experience. Notable Features: Exceptional Frequency Response: With a remarkable frequency response that extends from 22Hz to 1000Hz, the ELECTRA is tuned specifically for subwoofers, bass, and woofers. It excels in reproducing the deepest and most vibrant tones in your audio system. Variable BASS BOOST: The BASS BOOST feature is fully adjustable, ranging from 30 to 80Hz with an increase of up to 12dB. This allows for personalized control over the bass, further enhancing the listening experience. Robust Construction: The ELECTRA is built into a 100% aluminum chassis, ensuring durability and acting as an efficient heat sink to keep the module in excellent condition, even under heavy use. Impedance and Power: This amplifier is capable of delivering 10,000 Watts RMS with a 1-ohm impedance, providing the necessary power to energize your sound system with impressive energy and clarity. Other Technical Specifications: Efficiency at Nominal Impedance: 76% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22 to 1000Hz (-3dB) Subsonic High-Pass Filter (HPF): 22 - 65Hz Low-Pass Crossover (LPF): 80 - 250Hz Variable Bass Boost: 30 - 80Hz up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Music Signal): 500A Maximum Current Draw (Sine Signal): 1000A Minimum Recommended Power Cable: 70mm / 0 AWG Weight (Kg): 9.2 Height (mm): 73 Width (mm): 256 Depth (mm): 452 The ELECTRA 10K @ 1 Ohm Amplifier Module is the ideal choice for those seeking uncompromising power and audio quality, making your listening sessions a truly exceptional audio experience.

Read more less

Electra Bass 12K Amplifier: 12,000 Watts RMS at 1 Ohm for Unrivaled Audio Power Unleash Thunderous Bass with Precision EngineeringThe Electra Bass 12K Amplifier from the Electra line is crafted for audiophiles and car audio enthusiasts who demand unmatched bass performance. Engineered to deliver a staggering 12,000 Watts RMS at 1 Ohm, this amplifier transforms your audio system with deep, resonant tones and crystal-clear clarity. Whether you're powering subwoofers, bass drivers, or woofers, the Electra 12K elevates your listening experience to extraordinary heights. Key Features Exceptional Frequency Response: Tuned for bass perfection, the Electra 12K offers a frequency range of 22Hz to 1000Hz (-3dB), ensuring powerful, immersive low-end sound that brings every beat to life. Customizable Bass Boost: Features a variable Bass Boost (30–80Hz, up to 12dB), allowing you to fine-tune the bass response for a tailored, heart-pounding audio experience. Durable Aluminum Chassis: Encased in a robust 100% aluminum chassis, this amplifier combines sleek aesthetics with superior heat dissipation, ensuring reliable performance even during intense, prolonged use. High-Power Output: Delivers 12,000 Watts RMS at 1 Ohm, providing unmatched power to drive your audio system with precision and impact. Technical Specifications Efficiency at Nominal Impedance: 76% Input Voltage: 9–15V DC Input Impedance: 100K Ohms Total Harmonic Distortion (THD) at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22–1000Hz (-3dB) High-Pass Filter (Subsonic): 22–65Hz Low-Pass Crossover (LPF): 80–250Hz Variable Bass Boost: 30–80Hz, up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Musical Signal): 650A Maximum Current Draw (Sine Signal): 1200A Minimum Recommended Power Cable: 70mm² / 0 AWG Weight: 9.2 kg Dimensions (H x W x D): 73mm x 256mm x 452mm Why Choose the Electra Bass 12K?Designed for those who crave superior bass performance, the Electra Bass 12K Amplifier combines cutting-edge technology with rugged durability. Its advanced features, including adjustable crossovers and bass boost, allow for precise sound customization, while the high-efficiency design ensures optimal performance without compromising reliability. Whether you're competing in car audio events or enhancing your daily drive, this amplifier delivers unmatched power and clarity. Installation Notes Professional Installation Recommended: Ensure proper setup by a qualified technician to maximize performance and safety. Ventilation: Install in a well-ventilated area to maintain optimal heat dissipation. Wiring: Use the recommended 70mm² (0 AWG) power cable to handle the high current draw. Compatibility: Verify compatibility with your audio components and vehicle electrical system before installation. CautionFor professional installation only. Improper handling may result in electrical hazards or damage to the amplifier. Avoid exposure to moisture or extreme heat. Always use the recommended fuse and wiring specifications. Keep out of reach of children. Elevate Your Audio ExperienceThe Electra Bass 12K Amplifier is the ultimate choice for audiophiles seeking to dominate the low-end spectrum. With its robust design, customizable features, and unparalleled power, it transforms your car audio system into a powerhouse of sound, delivering an immersive experience that resonates with every beat.

Read more less

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Read more less

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Read more less

ELECTRA Series – Unmatched Bass Power and Precision The ELECTRA line was specially developed for audio enthusiasts who demand deep, powerful bass. With a frequency response ranging from 16Hz to 500Hz (-3dB), the ELECTRA is engineered to drive only subwoofers, low frequencies, and part of the mid-bass range with exceptional clarity and impact. One of its standout features is the Bass Boost control, adjustable between 30Hz and 80Hz, which further enhances the low-end punch of your system. Housed in a sleek, 100% aluminum chassis, this amplifier delivers 3000 WRMS of power through a single input channel at 1 Ohm impedance. It boasts extremely low harmonic distortion (<1%) and includes a Clipping Indicator for optimal performance monitoring. To ensure durability and safety, it features thermal protection with temperature-activated micro fans and short-circuit protection. With its clean, bold design, the ELECTRA amplifier integrates seamlessly into any custom sound setup. Technical Specifications Maximum Power @ 12.6V / 1 Ohm: 3000 WRMS Maximum Power @ 12.6V / 2 Ohms: 2100 WRMS Efficiency @ 1 Ohm: 76% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: <1% Input Sensitivity: 150mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response: 20Hz – 500Hz (-3dB) Bass Boost @ 30-80Hz: Adjustable from 0 to +12dB HPF (Subsonic Filter): 16Hz to 100Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover): 80Hz to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse: 150A Idle Current Draw: 2.5A Maximum Current Draw (musical signal): 180A Recommended Power Cable (min.): 35mm² Recommended Output Cable (min.): 2 x 4mm² / 2 x 11 AWG Weight: 3.7kg (8.16 lbs) Height: 63mm (2.48 in) Width: 225mm (8.86 in) Depth: 236mm (9.29 in) Cooling: Temperature-controlled micro fans Protections: Thermal and short-circuit protection Signal Input: RCA Chassis: Full aluminum construction

Read more less

ELECTRA Series – Precision Bass Amplification | 2 Ohms Version The ELECTRA 2 Ohms amplifier was designed for those who seek high-impact, ultra-defined bass with outstanding efficiency. With an extended frequency response from 16Hz to 500Hz (-3dB), it is ideal for powering subwoofers and low-frequency drivers, delivering both punch and clarity. The adjustable Bass Boost (30Hz to 80Hz) provides enhanced control over your system’s low-end performance, allowing you to fine-tune the bass response to match your setup. Crafted with a 100% aluminum chassis for superior durability and heat dissipation, the ELECTRA 2 Ohms delivers 3000 WRMS at 2 Ohms and 1700 WRMS at 4 Ohms. It also offers very low total harmonic distortion (<1%), a Clipping Indicator, and protection against thermal overload and short circuits. The integrated temperature-activated micro fans ensure the amplifier operates safely under demanding conditions. With its modern, clean design, the ELECTRA seamlessly fits into professional or custom sound systems, combining aesthetic appeal with performance. Technical Specifications – ELECTRA 2 Ohms Maximum Power @ 12.6V / 2 Ohms: 3000 WRMS Maximum Power @ 12.6V / 4 Ohms: 1700 WRMS Efficiency @ 2 Ohms: 82% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: <1% Input Sensitivity: 150mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16Hz – 500Hz (-3dB) Bass Boost @ 30-80Hz: Adjustable from 0 to +12dB HPF (Subsonic Filter): 16Hz to 100Hz LPF (Crossover): 80Hz to 500Hz Recommended Fuse: 150A Idle Current Draw: 2.5A Maximum Current Draw (musical signal): 160A Recommended Power Cable (min.): 35mm² Weight: 3.7kg (8.16 lbs) Height: 63mm (2.48 in) Width: 225mm (8.86 in) Depth: 236mm (9.29 in) Cooling: Temperature-activated micro fans Protections: Short-circuit and thermal protection Chassis: Solid aluminum construction

Read more less

ELECTRA Series – Ultra-Clean Power for High-Efficiency Systems | 4 Ohms Version The ELECTRA 4 Ohms amplifier is designed for those who demand clean, controlled, and powerful bass performance with maximum efficiency. Ideal for high-sensitivity subwoofer setups and midbass applications, this model delivers up to 3700 WRMS at 14.4V / 4 Ohms, and operates with an exceptional efficiency of 92% at 8 Ohms. Its extended frequency response of 5Hz to 500Hz (-3dB) when the limiter is off, and standard 20Hz to 500Hz range in normal mode, ensures precise and impactful low-frequency playback. The adjustable Bass Boost @ 45Hz allows up to +18dB gain, giving users full control over their system’s low-end response. Built with a robust aluminum chassis, the amplifier includes advanced protections (thermal and short-circuit), a Clipping Indicator, and temperature-controlled micro fans, ensuring safe and efficient performance even under demanding use. With a sleek, bold design and excellent power-to-efficiency ratio, the ELECTRA 4 Ohms is an ideal choice for audiophiles and professionals alike. Technical Specifications – ELECTRA 4 Ohms Maximum Power @ 14.4V / 4 Ohms: 3700 WRMS Maximum Power @ 14.4V / 8 Ohms: 2200 WRMS Maximum Power @ 12.6V / 4 Ohms: 3000 WRMS Maximum Power @ 12.6V / 8 Ohms: 1700 WRMS Efficiency @ 4 Ohms: 86% Efficiency @ 8 Ohms: 92% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: 0.10% Input Sensitivity: 150mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response (Limiter Off): 5Hz – 500Hz (-3dB) Frequency Response (Standard Mode): 20Hz – 500Hz (-3dB) Bass Boost @ 45Hz: Adjustable from 0 to +18dB HPF (Subsonic Filter): 20Hz – 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover): 80Hz – 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse: 150A Idle Current Draw: 2A Maximum Current Draw (sine signal): 300A Maximum Current Draw (musical signal): 150A Recommended Power Cables (min.): 21mm² / 4 AWG Recommended Output Cables (min.): 2 x 2.5mm² / 2 x 13 AWG Weight: 4.9kg (10.8 lbs) Height: 60mm (2.36 in) Width: 264mm (10.39 in) Depth: 308mm (12.13 in) Cooling: Temperature-controlled micro fans Protections: Thermal and short-circuit protection Chassis: High-dissipation aluminum  

Read more less