Product Description Propomax® Capsules is made with green propolis, which is obtained exclusively from a plant native to Brazil, Baccharis dracunculifolia, popularly known as Vassourinha or Rosemary of the Field. MODE OF USE: Take two capsules a day, preferably, before the main meals.   THE ULTIMATE POWER OF PROPOLISAT YOUR FINGERTIPS In the manufacturing process of PROPOMAX® Capsules is used the dry extract of propolis, which makes it an alcohol-free product. It was developed, especially, for those consumers who do not tolerate well the characteristic taste of propolis and also to make consumption more practical, because the presentation in capsules facilitates the transport of the product. In addition, the capsules used are vegetable capsules. PROPOMAX® Capsules is manufactured with EPP-AF propolis extract®, apis flora's patented standardized extract. This means that in its composition there is a chemically and biologically characterized extract, which goes through more than 100 quality control analyses, ensuring you a product free of contaminants, authentic and with the quality that your body needs to enjoy the benefits of propolis. The extracts that have EPP-AF standardization® have established pre-clinical and clinical safety, which ensures excellence in terms of natural product. NUTRITIONALInformation Quantity per 620 mg (2 capsules) %VD(*) It does not contain significant amount of caloric value, carbohydrates, proteins, total fats, total fats, saturated fats, trans fats, dietary fiber and sodium. **   (*) % Daily reference values based on a diet of 2,000 Kcal or 8400Kj. Your daily values may be higher or lower depending on your energy needs. (**) It does not contain significant amounts of proteins, total fats, saturated fats, trans fats and sodium.   LIST OFIngredients Extract of Green Propolis (EPP-AF®), microcrystalline cellulose (diluent) and silicon dioxide (antiumectante). Composition of the plant capsule: hydroxypropylmethylcellulose and titanium dioxide.   IMPORTANT INFORMATION  Each capsule contains 100 mg of Propolis EPP-AF®️ Does not contain gluten Keep in a dry, fresh and airy place

Leer Más Menos

SOS Cachos Salon Line Kit: Ultimate Curl Definition! Transform your curls into stunning waves with the SOS Cachos Kit from Salon Line! Experience deep hydration and maximum definition for your hair. Deep Hydration and Maximum Definition: Shampoo 300ml: Gently cleanses without drying, preparing your hair for intense hydration. Conditioner 300ml: Detangles, nourishes, and deeply hydrates, leaving your hair soft and shiny. Activating Jelly 300ml: Defines curls with maximum precision, controlling frizz and volume. Mask 300g: An intensive treatment that restores damaged strands, providing strength and elasticity. Styling Activator 500g: Shapes curls perfectly, creating long-lasting definition without weighing down your hair. Powerful Formula Combines: Coconut Oil: Rich in vitamins, lipids, and proteins, it deeply hydrates and nourishes your hair. Shea Butter: A natural emollient that promotes shine, softness, and deep nutrition. SuperWave Technology: A plant-based active ingredient rich in polysaccharides, defines curls with maximum precision and controls frizz. Perfect for wavy, curly, coily, and transitioning hair! Exceptional Results: Defined, soft, and shiny curls Frizz and volume control Deep hydration and nutrition Strength and elasticity for your hair Perfect and long-lasting styling How to Use: Apply Shampoo to damp hair, massage, and rinse. Apply Mask to damp hair, leave on for 15 minutes, and rinse. Apply Conditioner to damp hair, massage, and rinse. With damp hair, section into strands and apply Styling Activator using the fitagem technique. Finish with Activating Jelly, applying to damp or dry hair to revitalize curls. Bring your curls to life with the SuperWave Salon Line Kit! Additional Information: Dermatologically tested Not tested on animals 0% Sulfates, Parabens, Mineral Oil, Salt, Silicones, and Dyes Buy now and experience the transformation!

Leer Más Menos

Transform your curls with the Arvensis Natural Curls 2-in-1 Mask, a vegan formula designed to provide deep hydration and perfect definition for curly and coily hair. Developed with a unique blend of natural ingredients, this mask acts as a powerful moisturizer and finisher to ensure well-cared-for, radiant curls. Key Benefits: Advanced Nutrition: The rich formula with Coconut Oil, Plant Collagen, Avocado, and Vitamin E offers intense nourishment, repairing and revitalizing damaged hair. Intense Hydration: Provides deep, lasting hydration, ensuring softness and extra shine. Protection and Control: Enriched with a solar filter, the mask creates a protective film that helps control frizz, maintaining the natural moisture of your curls and ensuring resilience and definition. Ideal for “No Shampoo” Technique: Its multifunctional action is perfect for use with the no-shampoo technique, promoting nourished and radiant curls. Key Ingredients: Coconut Oil: Known for its high moisturizing and hydrating power, coconut oil replenishes essential nutrients, reduces frizz, and seals cuticles to prevent split ends. Plant Collagen: Provides essential amino acids and proteins for functional hair fiber nutrition, restoring elasticity and forming a flexible film that defines curls and controls frizz. Avocado: Natural avocado extract has emollient properties that ensure deep hydration and promote hair vitality. pH: 3.5-4.5 Suitable For: Ideal for curly and coily hair (3B / 3C / 4A / 4B / 4C), this mask is perfect for those seeking superior curl definition, hydration, and control.

Leer Más Menos

DetailsThe Redline Charger Source F60A is a high power power supply that makes it possible to power and charge automotive batteries.This model has automatic bivolt input, and an exclusive multimeter, which measures the voltage (voltage) and current being used in the system.In addition, as a main differential, it has a charge indicator, which informs how many% the battery is charged.It has a SCI system, which automatically controls battery charging.Additional InformationAvailability Immediate dispatchFloating Mode YesTotal input power (Watts) 900Output power (Watts) 900Adjustable Output Current YesInput Voltage BivoltOutput Voltage 12.5V to 14.4VApproximate Product Weight (kg) 1,268 Technical specificationsA Source Redline charger 60A is a high power source which enables power feed and charging automobile batteries, providing a maximum current of 60A , and operating in three modes.Slow Charge Mode: Charge the battery in 3 phases, (Elevation, absorption, equalization). Ideal for recharging batteries when they are low on charge, thus obtaining maximum charging efficiency and without generating wear and tear, which increases their useful life;.Auto SCI mode: Mode to be used when the system is on or fast charging the battery (s), as it will maintain maximum power at the output (14.4V) and will enter the pulsed SCI system when the battery (s) ) are loaded, floating;.Output Voltage Mode (Source): Digitally allows the choice of 8 voltage values ​​at the source output (12.6V / 12.8V / 13.0V / 13.2V / 13.8V / 14.0V / 14.2V / 14.4V).The Redline 60A Power Supply has:Current output 60 amps (real);Selectable output voltage 12.6V / 12.8V / 13.0V / 13.2V / 13.8V / 14.0V / 14.2V / 14.4V;Intelligent Charge System (SCI) 13.8 / 14.4 cyclic;Slow Charge System 3 phases (Elevation / Absorption / Equalization);Intelligent Ventilation System - Dynamic control by PWMBi-volt automatic 90 to 140Vac / 170 to 240Vac.Included Items01 Automotive SourceWarranty12 months

Leer Más Menos

Discover the Hair Revolution: Überliss Premium Progressive Brush System Immediate and Impressive Results: Perfect Straightening: Transform your hair into straight, soft and radiant shiny locks. Proven Volume Reduction: Say goodbye to frizz and tame excessive volume with long-lasting results. Instant Effect: Experience the immediate transformation in just 2 steps and enjoy smooth and silky hair for much longer. Cutting-Edge International Technology: Developed in Partnership with Avlon Industries of Chicago/USA: Überliss brings you the latest in hair straightening technology. State-of-the-Art Formula and Actives: Perfect results and 100% safe for your hair. Über Respect: Professional: Formaldehyde and glutaraldehyde free, registered with ANVISA under category 2. Hair: Conditions the natural texture of the hair, providing natural movement, luminous shine and complete restructuring of the hair fiber. Kit Contents: Überliss Pre Liss Shampoo 950ml: Deep cleans and prepares hair for treatment. Überliss Fiber ReStructure 950ml: Rebuilds the hair fiber, guarantees perfect straightening and volume reduction. Transform your hair with Überliss! #Überliss #ProgressiveBrush #ImmediateResults #VolumeReduction #InternationalTechnology #HealthyStraightHair  

Leer Más Menos

BANDA BD400.4 2OHM CAR AUDIO 400W 4CHANNELS 400X4 AMPLIFIER BANDA AUDIOPARTS The 400.4 offers 400Wrms with a configuration of 4 channels of 100Wrms at 2 Ohms each, or 2 channels of 200Wrms 4 Ohms in Bridge. This line is widely used for small systems as it accepts various installation configurations, meeting the most diverse market needs, playing any type of loudspeaker, from Subwoofers to Tweeters. You can equip your mini sound system to ensure daily quality in your tracks. Therefore, the product offers 4 channels with an impedance of 2 ohms and active crossover, in addition to a modern design with a black housing on top. - Operation Class: D - Maximum Power 12.6v @ 2 Ohms: 4 x 100 WRMS - Max Power 12.6v @ 4 Ohms: 4 x 65 WRMS - Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 200 WRMS - Max Power 14.4v @ 2 Ohms: 4 x 140 WRMS - Max Power 14.4v @ 4 Ohms: 4 x 85 WRMS - Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 280 WRMS - Key Active Crossover - Frequency Response: 20Hz to 20kHz - Low Pass LPF: 20Hz - 90Hz @ 12dB/8th - High Pass HPF: 90Hz - 20kHz @ 12B/8A - Band Pass (Flat) - THD: <1% - Input Voltage: 9 - 16V - Recommended fuse: 30A - Maximum Music Consumption: 20A - Power Cables (Min.): 10mm / 9 AWG - Output Cables (Min.): 2 x 1.5mm / 2 x 15 AWG - Signal Noise Ratio > 85dB - Input Sensitivity: 180mV - 3.4V - Input Impedance: 47K Ohms - Weight (Kg): 0.78 - Height (mm): 116 - Width (mm): 127 - Depth (mm): 53 NOTE: Installation of Banda Audioparts Amplifiers must always be carried out by a trained professional.

Leer Más Menos

The BD800.4 offers 800Wrms with a 4-channel configuration of 200Wrms at 2 Ohms each, or 400Wrms at 4 Ohms on each Bridge. This line is widely used for small and medium-sized systems as it accepts various installation configurations, meeting the most diverse needs of the market, playing any type of speaker.TECHNICAL SPECIFICATIONS• Maximum Power 14.4v @ 2 Ohms: 4 x 230 WRMS• Maximum Power 14.4v @ 4 Ohms: 4 x 150 WRMS• Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 460 WRMS• Maximum Power 12. 6v @ 2 Ohms: 4 x 200 WRMS• Maximum Power 12.6v @ 4 Ohms: 4 x 120 WRMS• Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 400 WRMS• Efficiency @ 4 Ohms: 82%• Efficiency @ 2 Ohms: 78%• Input Voltage: 9 - 16V• Input Impedance: 47k Ohms• THD+N: 1.5%• Input Sensitivity: 250mV - 3.4V •Signal to Noise Ratio: 85dB •Frequency Response: 20 to 20kHz (-3dBs)• HPF (Subsonic): 90Hz to 20kHz @ 12dBs/8° Linkwitz-Riley• LPF (Crossover): 20Hz to 90Hz @ 12dBs/8° Linkwitz-Riley• Recommended Fuse: 50 A• Resting Current : 700mA• Maximum Current (sine signal): 80 A• Maximum Current (musical signal): 40 A• Power Cables (min. recommended): 10mm• Output Cables (min. recommended): 2 x 1.5mm / 2 x 15 AWG• Weight (Kg): 0.82• Height (mm): 116• Width (mm): 127• Depth (mm): 53RECOMMENDATIONS BEFORE PURCHASECheck the product's compatibility with your equipment to avoid problems when using! Please check this with your installer or contracted professional before purchase.Check the voltage, power, impedance and other details that could make the installation unfeasible or cause damage to the product or the vehicle or equipment not covered by the warranty.For products that require installation, this must be done by a qualified professional. We are not responsible for misuse or incorrect installation carried out by the user or another unqualified person.

Leer Más Menos

Dynamic Power 2000.4 - Unparalleled Performance and Versatility Unleash the extraordinary with the Dynamic Power 2000.4 amplifier from Banda Audioparts, a true pioneer in the audio world. Standing as the sole amplifier line globally to feature the revolutionary power transfer function between channels, this innovation allows a seamless transfer of up to 60% between channels via a user-friendly app. Elevating convenience further, it incorporates an automatic gain structure, streamlining installation for a faster and easier setup. Fueled by a potent DSP, the amplifier now integrates an advanced Bluetooth processor. Dive into an array of features, including crossover, delay, equalization, channel routing, gains, and bridged/stereo selection. Delivering a commanding 2000 Watts RMS across 4 channels with an impedance range of 1 or 2 Ohms per channel, this amplifier showcases remarkable versatility, accommodating diverse installations with a single unit. Key Features: Power Transfer: Exclusive function for seamless channel power distribution Automatic Gain Structure: Simplifying installation for enhanced user convenience Integrated Bluetooth Processor: Elevates functionality with advanced DSP features Versatile Configuration: Suitable for Subwoofers, Woofers, Mid-Bass, Horns, or Super Tweeters Full-Range Frequency Response: Accommodates any audio project with ease Intuitive App: Configure the internal processor in real-time via Smartphone or Tablet Technical Specifications: 1 Ohm Configuration: Maximum Power 14.4v @ 1 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 2 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 2 Ohms Configuration: Maximum Power 14.4v @ 2 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 Comments: 1-year warranty by the manufacturer Illustrative images for representation only Professional installation recommended; not responsible for poor installation or product misuse.

Leer Más Menos

Banda Electra Bass 10K Amplifier Module Power 1 Ohm - 10.000 Watts RMS 2023 The ELECTRA line represents the perfect fusion of power and audio quality for lovers of deep, immersive bass. This amplifier module has been meticulously designed to provide an unparalleled audio experience. Notable Features: Exceptional Frequency Response: With a remarkable frequency response that extends from 22Hz to 1000Hz, the ELECTRA is tuned specifically for subwoofers, bass, and woofers. It excels in reproducing the deepest and most vibrant tones in your audio system. Variable BASS BOOST: The BASS BOOST feature is fully adjustable, ranging from 30 to 80Hz with an increase of up to 12dB. This allows for personalized control over the bass, further enhancing the listening experience. Robust Construction: The ELECTRA is built into a 100% aluminum chassis, ensuring durability and acting as an efficient heat sink to keep the module in excellent condition, even under heavy use. Impedance and Power: This amplifier is capable of delivering 10,000 Watts RMS with a 1-ohm impedance, providing the necessary power to energize your sound system with impressive energy and clarity. Other Technical Specifications: Efficiency at Nominal Impedance: 76% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22 to 1000Hz (-3dB) Subsonic High-Pass Filter (HPF): 22 - 65Hz Low-Pass Crossover (LPF): 80 - 250Hz Variable Bass Boost: 30 - 80Hz up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Music Signal): 500A Maximum Current Draw (Sine Signal): 1000A Minimum Recommended Power Cable: 70mm / 0 AWG Weight (Kg): 9.2 Height (mm): 73 Width (mm): 256 Depth (mm): 452 The ELECTRA 10K @ 1 Ohm Amplifier Module is the ideal choice for those seeking uncompromising power and audio quality, making your listening sessions a truly exceptional audio experience.

Leer Más Menos

Banda Electra Bass 12K Amplifier Audio Car 12.000 Watts RMS 1 ohm The ELECTRA line is meticulously engineered for those in pursuit of unparalleled bass performance. Key Features: Exceptional Frequency Response: Delivering an astounding frequency response ranging from 22Hz to 1000Hz, the ELECTRA is precisely tuned to accentuate subwoofers, bass, and woofers. It excels in reproducing the deepest and most resonant tones in your audio system. Variable BASS BOOST: The adaptable BASS BOOST feature, adjustable between 30 and 80Hz with a remarkable 12dB boost capability, enhances the bass response, taking your audio system's performance to the next level. Robust Chassis Design: Housed within a striking 100% aluminum chassis, the ELECTRA is not only built to withstand the test of time but also serves as an efficient heat dissipater, ensuring optimal performance even under rigorous usage. Impedance and Power: This amplifier delivers an impressive 12,000 Watts RMS with a 1-ohm impedance, providing the substantial power needed to energize your audio system with remarkable clarity. Additional Technical Specifications: Efficiency at Nominal Impedance: 76% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22 to 1000Hz (-3dB) High-Pass Filter (Subsonic): 22 - 65Hz Low-Pass Crossover (LPF): 80 - 250Hz Variable Bass Boost: 30 - 80Hz up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Musical Signal): 650A Maximum Current Draw (Sine Signal): 1200A Minimum Recommended Power Cable: 70mm / 0 AWG Weight (Kg): 9.2 Height (mm): 73 Width (mm): 256 Depth (mm): 452 The ELECTRA 12K @ 1 Ohm Amplifier Module is designed for audiophiles who demand superior bass performance, making it the ideal choice to elevate your audio experience to extraordinary heights.

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Leer Más Menos