ELECTRA Series – Precision Bass Amplification | 2 Ohms Version The ELECTRA 2 Ohms amplifier was designed for those who seek high-impact, ultra-defined bass with outstanding efficiency. With an extended frequency response from 16Hz to 500Hz (-3dB), it is ideal for powering subwoofers and low-frequency drivers, delivering both punch and clarity. The adjustable Bass Boost (30Hz to 80Hz) provides enhanced control over your system’s low-end performance, allowing you to fine-tune the bass response to match your setup. Crafted with a 100% aluminum chassis for superior durability and heat dissipation, the ELECTRA 2 Ohms delivers 3000 WRMS at 2 Ohms and 1700 WRMS at 4 Ohms. It also offers very low total harmonic distortion (<1%), a Clipping Indicator, and protection against thermal overload and short circuits. The integrated temperature-activated micro fans ensure the amplifier operates safely under demanding conditions. With its modern, clean design, the ELECTRA seamlessly fits into professional or custom sound systems, combining aesthetic appeal with performance. Technical Specifications – ELECTRA 2 Ohms Maximum Power @ 12.6V / 2 Ohms: 3000 WRMS Maximum Power @ 12.6V / 4 Ohms: 1700 WRMS Efficiency @ 2 Ohms: 82% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: <1% Input Sensitivity: 150mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16Hz – 500Hz (-3dB) Bass Boost @ 30-80Hz: Adjustable from 0 to +12dB HPF (Subsonic Filter): 16Hz to 100Hz LPF (Crossover): 80Hz to 500Hz Recommended Fuse: 150A Idle Current Draw: 2.5A Maximum Current Draw (musical signal): 160A Recommended Power Cable (min.): 35mm² Weight: 3.7kg (8.16 lbs) Height: 63mm (2.48 in) Width: 225mm (8.86 in) Depth: 236mm (9.29 in) Cooling: Temperature-activated micro fans Protections: Short-circuit and thermal protection Chassis: Solid aluminum construction

Read more less

ELECTRA Series – Ultra-Clean Power for High-Efficiency Systems | 4 Ohms Version The ELECTRA 4 Ohms amplifier is designed for those who demand clean, controlled, and powerful bass performance with maximum efficiency. Ideal for high-sensitivity subwoofer setups and midbass applications, this model delivers up to 3700 WRMS at 14.4V / 4 Ohms, and operates with an exceptional efficiency of 92% at 8 Ohms. Its extended frequency response of 5Hz to 500Hz (-3dB) when the limiter is off, and standard 20Hz to 500Hz range in normal mode, ensures precise and impactful low-frequency playback. The adjustable Bass Boost @ 45Hz allows up to +18dB gain, giving users full control over their system’s low-end response. Built with a robust aluminum chassis, the amplifier includes advanced protections (thermal and short-circuit), a Clipping Indicator, and temperature-controlled micro fans, ensuring safe and efficient performance even under demanding use. With a sleek, bold design and excellent power-to-efficiency ratio, the ELECTRA 4 Ohms is an ideal choice for audiophiles and professionals alike. Technical Specifications – ELECTRA 4 Ohms Maximum Power @ 14.4V / 4 Ohms: 3700 WRMS Maximum Power @ 14.4V / 8 Ohms: 2200 WRMS Maximum Power @ 12.6V / 4 Ohms: 3000 WRMS Maximum Power @ 12.6V / 8 Ohms: 1700 WRMS Efficiency @ 4 Ohms: 86% Efficiency @ 8 Ohms: 92% Input Voltage: 9V – 15V Input Impedance: 100K Ohms THD+N: 0.10% Input Sensitivity: 150mV – 8V Signal-to-Noise Ratio: 80dB Frequency Response (Limiter Off): 5Hz – 500Hz (-3dB) Frequency Response (Standard Mode): 20Hz – 500Hz (-3dB) Bass Boost @ 45Hz: Adjustable from 0 to +18dB HPF (Subsonic Filter): 20Hz – 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover): 80Hz – 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse: 150A Idle Current Draw: 2A Maximum Current Draw (sine signal): 300A Maximum Current Draw (musical signal): 150A Recommended Power Cables (min.): 21mm² / 4 AWG Recommended Output Cables (min.): 2 x 2.5mm² / 2 x 13 AWG Weight: 4.9kg (10.8 lbs) Height: 60mm (2.36 in) Width: 264mm (10.39 in) Depth: 308mm (12.13 in) Cooling: Temperature-controlled micro fans Protections: Thermal and short-circuit protection Chassis: High-dissipation aluminum  

Read more less

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 5000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. ELECTRA 5K1 Technical specifications Maximum Power 14.4v @ 1 Ohm 6200WRMS Maximum Power 14.4v @ 2 Ohms 4300WRMS Maximum Power 12.6v @ 1 Ohm 5000WRMS Maximum Power 12.6v @ 2 Ohms 3600 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 67% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 40mV – 2V Signal to Noise Ratio 90dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 250 A Rest Current 3.5A Maximum Current (sine signal) 600A Maximum Current (musical signal) 270A Power Cables (recommended min.) 50mm / 0 AWG Output Cables (recommended min.) 2 x 6mm / 2 x 3 AWG Weight (kg) 5.4 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Read more less

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 5000 WRMS with 1 input channel for connection and an impedance of 2 Ohms. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 2 Ohms 5500WRMS Maximum Power 14.4v @ 4 Ohms 3600 WRMS Maximum Power 12.6v @ 2 Ohms 5000WRMS Maximum Power 12.6v @ 4 Ohms 3000 WRMS Efficiency @ 4 Ohms 83% Efficiency @ 2 Ohms 78% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 50mV – 2V Signal to Noise Ratio 93dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 250 A Rest Current 3.5A Maximum Current (sine signal) 500A Maximum Current (musical signal) 270A Power Cables (recommended min.) 50mm / 0 AWG Output Cables (recommended min.) 2 x 6mm / 2 x 3 AWG Weight (kg) 5.4 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Read more less

Banda Electra Bass 8K Amplifier Module Power 1 Ohm - 8000 Watts RMS The ELECTRA line has been meticulously crafted for those in pursuit of unmatched, deep bass. It boasts a frequency response spanning from 16 to 500Hz, making it ideal for driving subwoofers and bass with precision. The standout feature is the variable BASS BOOST, adjustable from 30 to 80Hz with an impressive 12dB boost capability, enhancing the low-end performance of your audio system. Key Highlights: Impressive Frequency Response: With a wide frequency response range from 16 to 500Hz, the ELECTRA is perfectly suited for driving subwoofers and bass. It excels in delivering deep, resonant low-frequency tones that bring your audio to life. Variable BASS BOOST: The adjustable BASS BOOST, with a range of 30 to 80Hz and a powerful 12dB boost, allows you to fine-tune your bass to perfection, delivering a powerful and immersive listening experience. Robust Aluminum Construction: Housed in a robust 100% aluminum chassis, the ELECTRA is built to last and efficiently dissipates heat to ensure consistent performance, even during intense use. Impedance and Power: This amplifier is capable of producing 8000 Watts RMS with a 1-ohm impedance, providing the necessary power for impactful bass reproduction. Additional Technical Specifications: Maximum Power at 14.4V @ 1 Ohm: 9000 Watts RMS Maximum Power at 14.4V @ 2 Ohms: 7400 Watts RMS Maximum Power at 12.6V @ 1 Ohm: 8000 Watts RMS Maximum Power at 12.6V @ 2 Ohms: 5100 Watts RMS Efficiency @ 2 Ohms: 83% Efficiency @ 1 Ohm: 77% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <3% Input Sensitivity: 200mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16 to 500Hz (-3dB) High-Pass Filter (Subsonic): 16 - 120Hz @ 12dB/octave Linkwitz-Riley Low-Pass Crossover (LPF): 50 - 500Hz @ 12dB/octave Linkwitz-Riley Variable Bass Boost: 30 - 80Hz with up to 12dB boost Recommended Fuse: 2 x 225A Standby Current Draw: ~3A Maximum Current Draw (Musical Signal): 400A Maximum Current Draw (Sine Signal): 850A Minimum Recommended Power Cable: 70mm / 0 AWG Minimum Recommended Output Cable: 2 x 6mm / 2 x 3 AWG Weight (Kg): 6.3 Height (mm): 73 Width (mm): 256 Depth (mm): 317 The ELECTRA 8K 1 Ohm Amplifier Module is the ultimate choice for those who demand exceptional bass performance and precision. Elevate your audio experience to new heights with this powerful and versatile amplifier.

Read more less

Banda Electra Bass 8K Amplifier Audio Car 8000 Watts RMS 2 ohms The ELECTRA line has been meticulously engineered for those in pursuit of unparalleled bass performance. With a frequency response spanning from 16 to 500Hz, the ELECTRA is designed specifically for subwoofers and bass. The distinguishing feature is the variable BASS BOOST, adjustable from 30 to 80Hz with an impressive 12dB boost capability, enhancing the bass response of your audio system. Key Features: Wide Frequency Response: With a wide frequency response range from 16 to 500Hz, the ELECTRA is perfectly suited for driving subwoofers and bass. It excels in delivering deep, resonant low-frequency tones, immersing you in powerful and immersive sound. Variable BASS BOOST: The adaptable BASS BOOST feature, adjustable between 30 and 80Hz with a powerful 12dB boost, allows you to customize your bass to perfection, delivering a dynamic and impactful listening experience. Robust Aluminum Construction: Housed in a sturdy 100% aluminum chassis, the ELECTRA is built to last and efficiently dissipates heat to ensure consistent performance, even under intense use. Impedance and Power: This amplifier is capable of producing 8000 Watts RMS with a 2-ohm impedance, providing the necessary power for precise bass reproduction. Additional Technical Specifications: Maximum Power at 14.4V @ 2 Ohms: 9500 Watts RMS Maximum Power at 14.4V @ 4 Ohms: 6800 Watts RMS Maximum Power at 12.6V @ 2 Ohms: 8000 Watts RMS Maximum Power at 12.6V @ 4 Ohms: 5100 Watts RMS Efficiency @ 4 Ohms: 88% Efficiency @ 2 Ohms: 79% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <3% Input Sensitivity: 200mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16 to 500Hz (-3dB) High-Pass Filter (Subsonic): 16 - 120Hz @ 12dB/octave Linkwitz-Riley Low-Pass Crossover (LPF): 50 - 500Hz @ 12dB/octave Linkwitz-Riley Variable Bass Boost: 30 - 80Hz with up to 12dB boost Recommended Fuse: 2 x 225A Standby Current Draw: ~3A Maximum Current Draw (Musical Signal): 400A Maximum Current Draw (Sine Signal): 850A Minimum Recommended Power Cable: 70mm / 0 AWG Minimum Recommended Output Cable: 2 x 6mm / 2 x 3 AWG Weight (Kg): 6.3 Height (mm): 73 Width (mm): 256 Depth (mm): 317 The ELECTRA 8K 2 Ohms Amplifier Module is the perfect choice for those who demand exceptional bass performance and precision. Elevate your audio experience to new heights with this powerful and versatile amplifier.

Read more less

ELITE 1200.4 Amplifier Series: Power & Versatility for Your Audio System   Unleash the full potential of your sound system with the ELITE 1200.4 amplifier. Boasting a robust 1200 Watts RMS across 4 channels, this versatile amplifier is engineered to fit seamlessly into diverse audio setups. Its full-range frequency response makes it the perfect choice for powering a wide array of components, including subwoofers, woofers, mid-bass speakers, horn drivers, and super tweeters. The ELITE 1200.4 also offers flexible connectivity, allowing for 4, 3, or 2-channel configurations when utilizing bridge connections. Power a complete medium-sized sound system with exceptional audio quality and efficient power consumption.   ELITE 1200.4 - 1 Ohm Version   Experience impressive power with this 1-ohm per channel variant, designed for systems requiring lower impedance. Technical Specifications: Operating Class: Class D Max Power (14.4V, 1 Ohm): 4 x 400 WRMS Max Power (14.4V, 2 Ohms): 4 x 260 WRMS Max Power (14.4V, Bridge 2 Ohms): 2 x 800 WRMS Max Power (12.6V, 1 Ohm): 4 x 300 WRMS Max Power (12.6V, 2 Ohms): 4 x 200 WRMS Max Power (12.6V, Bridge 2 Ohms): 2 x 600 WRMS Efficiency (2 Ohms): 85% Efficiency (1 Ohm): 75% Input Voltage: 9 - 15V Input Impedance: 100K Ohms THD+N: <1% Input Sensitivity: 150mV - 4V Signal-to-Noise Ratio: 85dB Frequency Response: 20 to 20kHz (-3dBs) HPF (High Pass Filter): 80Hz 12dB/octave Linkwitz-Riley LPF (Low Pass Filter): 80Hz 12dB/octave Linkwitz-Riley Recommended Fuse: 80 A Quiescent Current: 1.5 A Max Current (musical signal): 75 A Power Cables (min. recommended): 16mm² / 5 AWG Output Cables (min. recommended): 2 x 2.5mm² / 2 x 14 AWG Weight (Kg): 3.7 Height (mm): 63 Width (mm): 225 Depth (mm): 236   ELITE 1200.4 - 2 Ohm Version   This 2-ohm per channel amplifier is optimized for systems requiring higher impedance, delivering reliable and clear audio performance. Technical Specifications: Operating Class: Class D Max Power (14.4V, 2 Ohms): 4 x 400 WRMS Max Power (14.4V, 4 Ohms): 4 x 260 WRMS Max Power (14.4V, Bridge 4 Ohms): 2 x 800 WRMS Max Power (12.6V, 2 Ohms): 4 x 300 WRMS Max Power (12.6V, 4 Ohms): 4 x 200 WRMS Max Power (12.6V, Bridge 4 Ohms): 2 x 600 WRMS Efficiency (4 Ohms): 92% Efficiency (2 Ohms): 80% Input Voltage: 9 - 15V Input Impedance: 100K Ohms THD+N: <1% Input Sensitivity: 150mV - 4V Signal-to-Noise Ratio: 85dB Frequency Response: 20 to 20kHz (-3dBs) HPF (High Pass Filter): 80Hz 12dB/octave Linkwitz-Riley LPF (Low Pass Filter): 80Hz 12dB/octave Linkwitz-Riley Recommended Fuse: 80 A Quiescent Current: 1.5 A Max Current (musical signal): 75 A Power Cables (min. recommended): 16mm² / 5 AWG Output Cables (min. recommended): 2 x 2.5mm² / 2 x 14 AWG Weight (Kg): 3.7 Height (mm): 63 Width (mm): 225 Depth (mm): 236

Read more less

Banda Elite 2000.4 – 4-Channel Amplifier 2000 Watts RMS Power and Flexibility for Dynamic Sound Systems The Elite 2000.4 from Banda Audioparts delivers 2000 Watts RMS across 4 channels, combining robust performance with exceptional efficiency in a compact Class D design. Engineered for versatility, it supports 1 or 2 Ohm loads per channel and features Bridged mode operation for 2, 3, or 4-channel configurations - making it ideal for multi-speaker setups. Key Features: High-Performance Output @2 Ohms (14.4V): 4 x 600W RMS @4 Ohms (14.4V): 4 x 400W RMS Bridged @4 Ohms (14.4V): 2 x 1250W RMS Excellent efficiency: 86% (@4 Ohms) Full-Range Frequency Response (5Hz-22kHz) Compatible with all speaker types: subwoofers, woofers, mid-range, horns, and tweeters Precision crossover controls: HPF (20Hz-90Hz, 12dB/oct) LPF (90Hz-20kHz, 12dB/oct) Clean Power Delivery Ultra-low distortion (THD <1%) High signal clarity (80dB SNR) Universal Compatibility Wide input voltage range (9-15V) 100K Ohm input impedance for stable signal reception Optimized Design Efficient Power Management Recommended fuse: 100A Power cable: 4 AWG (21mm²) minimum Speaker cable: 2 x 13 AWG (2.5mm²) Compact Footprint Dimensions: 8.4" (W) x 9.7" (D) x 2.2" (H) Lightweight: 7.2 lbs for easy integration Perfect for mobile audio enthusiasts and installers, the Elite 2000.4 delivers Banda's signature sound quality with energy-efficient operation. Whether powering a complete system or specific speaker components, it offers professional-grade performance in a versatile package. Banda Audioparts - Engineering Superior Sound 🎵⚡

Read more less

Banda Elite 4000.4 – 4-Channel Amplifier 4000 Watts RMS Power and Versatility for High-Performance Audio Systems The Elite 4000.4 from Banda Audioparts is a Class D 4-channel amplifier capable of delivering 4000 Watts RMS with high efficiency and low power consumption. Designed to meet the demands of powerful and versatile sound systems, it supports flexible configurations at 1 or 2 Ohms per channel, as well as Bridged mode for 2, 3, or 4-way setups. Key Features: Robust Power Output @2 Ohms (14.4V): 4 x 1200W RMS @4 Ohms (14.4V): 4 x 800W RMS Bridged Mode @4 Ohms (14.4V): 2 x 2400W RMS High efficiency: up to 92% (@4 Ohms) Full-Range Frequency Response (5Hz – 22kHz) Ideal for subwoofers, woofers, mid-range drivers, horns, and tweeters Adjustable filters: HPF (20Hz – 90Hz, 12dB/oct) LPF (90Hz – 20kHz, 12dB/oct) Low Distortion (THD < 0.10%) and high signal-to-noise ratio (88dB) Stable Power Supply (9V – 15V) with overload protection High-Current Connections Recommended power cable: 2 AWG (35mm²) Speaker cable: 2 x 11 AWG (4mm²) Recommended fuse: 200A Compact and Efficient Design Dimensions: 10.6" (W) x 12.3" (D) x 2.4" (H) Weight: Just 11.2 lbs – easy installation in various setups Perfect for those seeking power, versatility, and proven audio quality, the Elite 4000.4 is the ideal choice for mid-to-high-performance sound systems, ensuring high output without compromising sound fidelity. Banda Audioparts – Technology That Drives Sound! 🚀🔊

Read more less

Banda ICE 1500 Amplifier Module Power 1 Ohms 1500Wrms   DESCRIPTION  Especially developed for those who want power without loss of quality, Amplifier Modules are perfect devices for automotive sound projects, aiming at amplification and performance in audio reproduction.Designed by anyone who understands and invests in technology, the Ice 2500 amplifier module is one of the most efficient and modern modules in the Class D market, with 1500W RMS power, active Crossover by Linkwitz-Riley card, gain control and excellent signal-to-noise ratio, with LED clipping indicator, making it the most complete, modern and efficient equipment for automotive sound enthusiasts. CHARACTERISTICS1 channel 1500Wrms 2ohm / 12.6Vdc1 channel 1900Wrms 2ohm / 14.4Vdc1 channel 1000Wrms 4ohm / 12.6VdcFull Power Current: 79A (Average Music Program)Dimensions ICE 1500: Comp. 243mm / Hr. 54mm / Larg. 209mmWeight: 2.90kgDIMENSIONSDimensions: Comp. 243mm / Hr. 54mm / Larg. 209mm PACKAGE CONTENT• 1 - Band Amplifier 1 Channel ICE1500 - 1500W RMS (2 Ohms)  Important:1 year warranty.Auto Equip recommends that the installation be done by a specialized professional and does not take responsibility for the misuse of the product.

Read more less

Banda ICE 1500 Amplifier Module Power   2 Ohms 1500Wrms   DESCRIPTION  Especially developed for those who want power without loss of quality, Amplifier Modules are perfect devices for automotive sound projects, aiming at amplification and performance in audio reproduction.Designed by anyone who understands and invests in technology, the Ice 2500 amplifier module is one of the most efficient and modern modules in the Class D market, with 1500W RMS power, active Crossover by Linkwitz-Riley card, gain control and excellent signal-to-noise ratio, with LED clipping indicator, making it the most complete, modern and efficient equipment for automotive sound enthusiasts. CHARACTERISTICS1 channel 1500Wrms 2ohm / 12.6Vdc1 channel 1900Wrms 2ohm / 14.4Vdc1 channel 1000Wrms 4ohm / 12.6VdcFull Power Current: 79A (Average Music Program)Dimensions ICE 1500: Comp. 243mm / Hr. 54mm / Larg. 209mmWeight: 2.90kgDIMENSIONSDimensions: Comp. 243mm / Hr. 54mm / Larg. 209mm PACKAGE CONTENT• 1 - Band Amplifier 1 Channel ICE1500 - 1500W RMS (2 Ohms)  Important:1 year warranty.Auto Equip recommends that the installation be done by a specialized professional and does not take responsibility for the misuse of the product.

Read more less

ICE X 2001 The ICE X Line was developed with cutting-edge technology, achieving an impressive level of audio quality, reaching a frequency response of 5Hz to 22kHz. The ICE X 2001 offers 2000 Wrms in 1 channel at 1 Ohm. Because it has an excellent frequency response, it is a great product for large projects and can be used in any speaker model, from Subwoofers to Tweeters. It also has Bass Boost control @ 45Hz, 100% aluminum chassis and forced ventilation. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 1400 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 to 22kHz (-3dBs) Frequency Response 20 to 20kHz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 20kHz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220A Maximum Current (musical signal) 110A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243 ICE X 2002 The ICE X Line was developed with cutting-edge technology, achieving an impressive level of audio quality, reaching a frequency response of 5Hz to 22kHz. The ICE X 2002 offers 2000 Wrms in 1 channel at 2 Ohms. Because it has an excellent frequency response, it is a great product for large projects and can be used in any speaker model, from Subwoofers to Tweeters. It also has Bass Boost control @ 45Hz, 100% aluminum chassis and forced ventilation. Technical specifications Maximum Power 14.4v @ 2 Ohms 2700 WRMS Maximum Power 14.4v @ 4 Ohms 1800 WRMS Maximum Power 12.6v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 4 Ohms 1400 WRMS Efficiency @ 4 Ohms 85% Efficiency @ 2 Ohms 75% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 230mV – 4V Signal to Noise Ratio 86dB Frequency Response (Switch OFF) 5 to 22kHz (-3dBs) Frequency Response 20 to 20kHz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 20kHz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 235A Maximum Current (musical signal) 115A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Read more less