Amplifier Module ICE 3001 Band Power 1 Ohm 3000Wrms DESCRIPTION  The ICE line was developed with state-of-the-art technology to be a high power amplifier and efficiency. With its 100% aluminum chassis, it offers better heat dissipation, resulting in low battery consumption. The ICE 3001 offers 3000Wrms in 1 channel at 1 Ohm, being an amplifier with an excellent frequency response in FULL RANGE (18Hz - 20KHz) that adapts to the most varied sound projects.   Technical specifications  • Model: Ice 3001 • Operation class: Bridge Class D • 1 channel 3000 Wrms 1 Ohms / 12.6Vdc • 1 channel 1800 Wrms 2 Ohms / 12.6Vdc • Total current consumption: 155A (Musical Signal) • Linkwitz-Riley Active Crossover Variable Low Pass from 18Hz to 25KHz (12dB / octave) • Input impedance 22 Kohms • Frequency response 18Hz to 20KHz (-3dB) • Variable subsonic filter from 18Hz to 120Hz • Clipping Indicator • THD less than 0.33% • Signal to Noise Ratio> 74.3 dB • Damping factor> 100 • Input sensitivity from 150mV to 2.1Volts • Gain control • Differential mode signal input • Dimensions WxDxH: 308 x 264 x 60 mm • Use cables of at least 21mm² for power • Blue LED indicator: Power supply and amplifiers on / off • LED indicator red of: Output distortion (Clipping) or output short-circuit • Yellow LED: Battery voltage below specified.   Package Contents: • 1 Ice 3000 Amplifier Module • Manual   Caution: According to Federal Law No. 11,291, prolonged exposure to noise over 85 dB can cause damage to the auditory system.   Important: 1 year warranty. Unitary value.   NOTE: The installation of Audioparts BAND amplifiers should always be performed by a qualified professional.

Read more less

Banda ICE 3002 Amplifier Module Power 2 Ohm 3000Wrms DESCRIPTION The ICE Line has been developed with state-of-the-art technology to be an amplifier of high power and efficiency. With its 100% aluminum chassis, it offers better heat dissipation resulting in low battery consumption.The ICE 3002 offers 3000Wrms in 1 channel at 2 Ohms, being an amplifier with an excellent frequency response in FULL RANGE (18Hz - 20KHz) it suits the most varied sound projects.Technical specifications:• Model: Ice 3002• Operation class: Bridge Class D• 1 channel 3000 Wrms 2 Ohms / 12.6Vdc• 1 channel 1800 Wrms 4 Ohms / 12.6Vdc• Full power consumption current: 155A (Musical Signal)• Linkwitz-Riley Active Crossover Variable Low Pass from 18Hz to 25KHz (12dB / octave)• Input impedance 22 Kohms• Frequency response 18Hz to 20KHz (-3dB)• Variable subsonic filter 18Hz to 120Hz• Clipping Indicator• THD less than 0.33%• Signal to noise ratio> 74.3 dB• Damping factor> 100• Input sensitivity from 150mV to 2.1Volts• Gain control• Differential mode signal input• Dimensions LxWxH: 308 x 264 x 60 mm• Use cables of at least 21mm² for power• Blue LED indicator: Source and amplifiers on / On• Red LED indicator of: Output distortion (Clipping) or output short-circuit• Yellow LED indicator: Battery voltage below specified. Package content:• 1 Ice 3000 Amplifier Module• ManualCaution: According to Federal Law No. 11,291, prolonged exposure to noise exceeding 85 dB can cause damage to the hearing system.Important:1 Year Warranty.Unitary value. NOTE: Installation of Audioparts BAND amplifiers must always be performed by a qualified professional.   

Read more less

Technical Specifications Total Power 12,6 @ 1 Ohm 1 x 15000 WRMS Total Power 12,6 @ 2 Ohms 1 x 9800 WRMS Input Voltage 9 – 15V Input Impedance 17 kOhms THD+Noise <1% Input Sensitivity 160mV – 6V SNR 82dB Frequency Response 13 to 2kHz (-3dBs) Variable Subsonic Filter 13Hz – 120Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 125A (x6) + 60A (x1) Current at Rest 3,5 A Average Current Draw (Music) 630 A Weight (Lb) 30,5 Height (in) 2,5 Width (in) 30,1 Depth (in) 10,4

Read more less

The VIKING Line is intended for those who really seek a powerful sound. In this line we have some models that are featured in major championships worldwide.It also has a 100% aluminum chassis that offers better heat dissipation, resulting in low battery consumption and great performance.The Viking 5000 delivers 5000 Wrms on 1 channel at 1 Ohm. Used in medium and large projects as it is a high performance amplifier, it has a frequency response of (5Hz – 5kHz) and can be used to play various types of speakers, such as Subwoofer, Woofers and Mid-Bass.   Class D Total Power 14,4 @ 1 Ohm 6200 WRMS Total Power 14,4 @ 2 Ohms 4300 WRMS Total Power 12,6 @ 1 Ohm 5500 WRMS Total Power 12,6 @ 2 Ohms 3600 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 67% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+Noise <1% Input Sensitivity 40mV – 2V SNR 90dB Frequency Response (Key OFF) 5 to 5KHz (-3dBs) Frequency Response 20 to 5KHz (-3dBs) Bass Bosst @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 5kHz @ 12dB/octave Linkwitz-Riley Recommended Fuse 250 A Current at Rest 3,5 A Average Current Draw (Sinusoidal) 600 A Average Current Draw (Music) 270 A Power Wire Gauge (min. Recommended) 50mm / 0 AWG Speaker Wire Gauge (min. Recommended) 2 x 6mm / 2 x 3 AWG Weight (Lb) 11,9 Height (in) 2,4 Width (in) 10,6 Depth (in) 12,3

Read more less

The VIKING Line Viking 5000 is a high-performance Class D monoblock amplifier designed for powerful audio applications, particularly in medium to large car audio setups. Here’s a breakdown of its key features and specifications: Key Features: High Power Output: Delivers up to 5000W RMS @ 2Ω (12.6V) and 5500W RMS @ 2Ω (14.4V), making it ideal for subwoofers and high-power speaker setups. Aluminum Chassis: Ensures efficient heat dissipation, improving performance and reducing battery drain. Wide Frequency Response: 5Hz – 5kHz (Key OFF) 20Hz – 5kHz (Key ON) Suitable for subwoofers, woofers, and mid-bass speakers. Adjustable Bass Boost: Variable 0 to +18dB @ 45Hz for deep bass enhancement. Advanced Filtering: HPF (Subsonic): 20Hz – 80Hz (12dB/octave) LPF (Crossover): 80Hz – 5kHz (12dB/octave) Both use Linkwitz-Riley slopes for precise tuning. High Efficiency: 83% @ 4Ω 78% @ 2Ω Reduces power waste and strain on the electrical system. Electrical Specifications: Parameter Value THD+Noise <1% Input Sensitivity 50mV – 2V Signal-to-Noise Ratio (SNR) 93dB Input Impedance 100kΩ Recommended Fuse 250A Idle Current Draw 3.5A Avg. Current (Music) 270A Avg. Current (Sine Wave) 500A Installation Requirements: Power Wire: 0 AWG (50mm²) minimum Speaker Wire: 2 x 3 AWG (2 x 6mm²) minimum Voltage Range: 9V – 15V (stable operation even with slight voltage drops) Physical Dimensions: Weight: 11.9 lbs (5.4 kg) Height: 2.4 in (6.1 cm) Width: 10.6 in (26.9 cm) Depth: 12.3 in (31.2 cm) Ideal For: Competition-grade subwoofer systems Large SPL (Sound Pressure Level) builds High-power bass applications Conclusion: The Viking 5000 is a beast of an amplifier, built for extreme power handling and efficient performance. Its adjustable filters, bass boost, and high efficiency make it a top choice for serious car audio enthusiasts and competitors. If you need massive bass with clean power, this amp delivers.

Read more less

 Banda Viking 8000 Watts RMS Amplifier Audio Car 9500 Watts RMS 1 ohm   The VIKING line is designed for those who truly seek powerful sound. In this line, we offer models that have earned recognition in global-level competitions. The Viking 8000 delivers a staggering 8000Wrms in a single channel at 1 Ohm, making it a preferred choice for ambitious projects due to its high-performance capabilities. It boasts a wide frequency response from 16Hz to 16kHz, making it suitable for driving various types of speakers. Crafted with a 100% aluminum chassis, the Viking 8000 provides superior heat dissipation, resulting in reduced battery consumption and exceptional performance. Technical Specifications: Operating Class: Class D Maximum Power at 12.6V @ 1 Ohm: 8000 Watts RMS Maximum Power at 12.6V @ 2 Ohms: 5100 Watts RMS Maximum Power at 14.4V @ 1 Ohm: 9000 Watts RMS Maximum Power at 14.4V @ 2 Ohms: 7400 Watts RMS Efficiency @ 2 Ohms: 83% Efficiency @ 1 Ohm: 77% Input Voltage: 9 - 15V Input Impedance: 22K Ohms Total Harmonic Distortion + Noise: ~3% Input Sensitivity: 200mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16 to 16kHz (-3dB) High-Pass Filter (Subsonic): 16 - 120Hz @ 12dB/octave Linkwitz-Riley Low-Pass Crossover: 50 - 16kHz @ 12dB/octave Linkwitz-Riley Variable Bass Boost: 30 - 80Hz with up to 12dB boost Recommended Fuse: 2 x 225A Standby Current Draw: ~3A Maximum Current Draw (Musical Signal): 400A Sinusoidal Current: 850A Minimum Recommended Power Cable: 70mm / 0 AWG Minimum Recommended Output Cable: 2 x 6mm / 2 x 3 AWG Gain Control Differential Input Signal Forced Ventilation with Micro Fans Weight (Kg): 6.3 Height (cm): 7.3 Width (cm): 25.6 Depth (cm): 31.7 Package Contents: 1 Amplifier Module Manual and Warranty Certificate Important: 1-year manufacturer's warranty.

Read more less

The VIKING line is tailored for those seeking potent and powerful sound. In this line, you will find models that have garnered recognition in top-tier international competitions. The Viking 8000 delivers an impressive 8000Wrms in a single channel at 2 Ohms, making it a preferred choice for large-scale projects due to its high-performance capabilities. It features a wide frequency response ranging from 16Hz to 16kHz, making it adaptable for driving various types of speakers. Crafted with a 100% aluminum chassis, the Viking 8000 offers superior heat dissipation, resulting in lower battery consumption and exceptional performance. Technical Specifications: Operating Class: Class D Maximum Power at 12.6V @ 2 Ohms: 8000 Watts RMS Maximum Power at 12.6V @ 4 Ohms: 5100 Watts RMS Maximum Power at 14.4V @ 2 Ohms: 9500 Watts RMS Maximum Power at 14.4V @ 4 Ohms: 6800 Watts RMS Efficiency @ 4 Ohms: 88% Efficiency @ 2 Ohms: 79% Input Voltage: 9 - 15V Input Impedance: 22K Ohms Total Harmonic Distortion + Noise: ~3% Input Sensitivity: 200mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 16 to 16kHz (-3dB) High-Pass Filter (Subsonic): 16 - 120Hz @ 12dB/octave Linkwitz-Riley Low-Pass Crossover: 50 - 16kHz @ 12dB/octave Linkwitz-Riley Variable Bass Boost: 30 - 80Hz with up to 12dB boost Recommended Fuse: 2 x 225A Standby Current Draw: ~3A Maximum Current Draw (Musical Signal): 400A Sinusoidal Current: 850A Minimum Recommended Power Cable: 70mm / 0 AWG Minimum Recommended Output Cable: 2 x 6mm / 2 x 3 AWG Gain Control Differential Input Signal Forced Ventilation with Micro Fans Weight (Kg): 6.3 Height (cm): 7.3 Width (cm): 25.6 Depth (cm): 31.7 Package Contents: 1 Amplifier Module Manual and Warranty Certificate Important: Manufacturer's 1-year warranty.

Read more less

🔥 LIMITED STOCK - READY TO SHIP! OFFICIAL LAUNCH: INCLUDES NEOPRENE PROTECTIVE COVER + 1 OVERGRIP! Your time to shine on the Beach Tennis court has arrived! With the Freestyle Prolife Beach Tennis Racket, you’re ready to play like a pro at an unbeatable price. Engineered for demanding players, this racket delivers power, control, and elite performance in every match. 🎯 WHY CHOOSE THE FREESTYLE PROLIFE? ✅ Full Carbon 3K Construction – 100% carbon fiber for maximum power & flexibility✅ Pro-Level Control – Rough Surface technology for enhanced grip & spin✅ Ultra-Light & Balanced – EVA Soft core for effortless maneuverability✅ FIT Approved – 28-hole design for optimal ball control & reach✅ Injury Prevention – Impact Absorption Tech (IAT) reduces strain & fatigue 📦 WHAT’S INCLUDED? ✔ 1x Freestyle Prolife Racket (Full Carbon 3K)✔ 1x Premium Neoprene Cover (100% shockproof protection)✔ 1x Overgrip (For enhanced comfort & sweat absorption) ⚡ KEY SPECS: Weight: 320g (±10g) Length: 50cm | Width: 23cm | Thickness: 21mm 28 Holes (FIT Standard) 🏆 PERFECT FOR: Competitive players seeking power & precision Intermediate to advanced athletes Anyone who refuses to miss a shot! 🚀 UNLEASH YOUR CHAMPION – DOMINATE THE COURT TODAY!

Read more less

🔥 LIMITED STOCK - READY TO SHIP! OFFICIAL LAUNCH: INCLUDES NEOPRENE PROTECTIVE COVER + 1 OVERGRIP! Your time to shine on the Beach Tennis court has arrived! With the Freestyle Prolife Beach Tennis Racket, you’re ready to play like a pro at an unbeatable price. Engineered for demanding players, this racket delivers power, control, and elite performance in every match. 🎯 WHY CHOOSE THE FREESTYLE PROLIFE? ✅ Full Carbon 3K Construction – 100% carbon fiber for maximum power & flexibility✅ Pro-Level Control – Rough Surface technology for enhanced grip & spin✅ Ultra-Light & Balanced – EVA Soft core for effortless maneuverability✅ FIT Approved – 28-hole design for optimal ball control & reach✅ Injury Prevention – Impact Absorption Tech (IAT) reduces strain & fatigue 📦 WHAT’S INCLUDED? ✔ 1x Freestyle Prolife Racket (Full Carbon 3K)✔ 1x Premium Neoprene Cover (100% shockproof protection)✔ 1x Overgrip (For enhanced comfort & sweat absorption) ⚡ KEY SPECS: Weight: 320g (±10g) Length: 50cm | Width: 23cm | Thickness: 21mm 28 Holes (FIT Standard) 🏆 PERFECT FOR: Competitive players seeking power & precision Intermediate to advanced athletes Anyone who refuses to miss a shot! 🚀 UNLEASH YOUR CHAMPION – DOMINATE THE COURT TODAY!

Read more less

🔥 LIMITED STOCK - READY TO SHIP! OFFICIAL LAUNCH: INCLUDES NEOPRENE PROTECTIVE COVER + 1 OVERGRIP! Your time to shine on the Beach Tennis court has arrived! With the Freestyle Prolife Beach Tennis Racket, you’re ready to play like a pro at an unbeatable price. Engineered for demanding players, this racket delivers power, control, and elite performance in every match. 🎯 WHY CHOOSE THE FREESTYLE PROLIFE? ✅ Full Carbon 3K Construction – 100% carbon fiber for maximum power & flexibility✅ Pro-Level Control – Rough Surface technology for enhanced grip & spin✅ Ultra-Light & Balanced – EVA Soft core for effortless maneuverability✅ FIT Approved – 28-hole design for optimal ball control & reach✅ Injury Prevention – Impact Absorption Tech (IAT) reduces strain & fatigue 📦 WHAT’S INCLUDED? ✔ 1x Freestyle Prolife Racket (Full Carbon 3K)✔ 1x Premium Neoprene Cover (100% shockproof protection)✔ 1x Overgrip (For enhanced comfort & sweat absorption) ⚡ KEY SPECS: Weight: 320g (±10g) Length: 50cm | Width: 23cm | Thickness: 21mm 28 Holes (FIT Standard) 🏆 PERFECT FOR: Competitive players seeking power & precision Intermediate to advanced athletes Anyone who refuses to miss a shot! 🚀 UNLEASH YOUR CHAMPION – DOMINATE THE COURT TODAY!

Read more less

🔥 LIMITED STOCK - READY TO SHIP! OFFICIAL LAUNCH: INCLUDES NEOPRENE PROTECTIVE COVER + 1 OVERGRIP! Your time to shine on the Beach Tennis court has arrived! With the Freestyle Prolife Beach Tennis Racket, you’re ready to play like a pro at an unbeatable price. Engineered for demanding players, this racket delivers power, control, and elite performance in every match. 🎯 WHY CHOOSE THE FREESTYLE PROLIFE? ✅ Full Carbon 3K Construction – 100% carbon fiber for maximum power & flexibility✅ Pro-Level Control – Rough Surface technology for enhanced grip & spin✅ Ultra-Light & Balanced – EVA Soft core for effortless maneuverability✅ FIT Approved – 28-hole design for optimal ball control & reach✅ Injury Prevention – Impact Absorption Tech (IAT) reduces strain & fatigue 📦 WHAT’S INCLUDED? ✔ 1x Freestyle Prolife Racket (Full Carbon 3K)✔ 1x Premium Neoprene Cover (100% shockproof protection)✔ 1x Overgrip (For enhanced comfort & sweat absorption) ⚡ KEY SPECS: Weight: 320g (±10g) Length: 50cm | Width: 23cm | Thickness: 21mm 28 Holes (FIT Standard) 🏆 PERFECT FOR: Competitive players seeking power & precision Intermediate to advanced athletes Anyone who refuses to miss a shot! 🚀 UNLEASH YOUR CHAMPION – DOMINATE THE COURT TODAY!

Read more less

🏖️ Official Beach Tennis Kit – Net 4 Pro Strips + Marking Tape Complete your court with the official setup! This pro-grade Beach Tennis kit includes everything you need for a regulation-sized court: a high-resistance net and durable marking tape for precise boundaries. 📦 WHAT’S INCLUDED? ✔ 1× Official Beach Tennis Net 4 Pro Strips✔ 1× Beach Tennis Marking Tape with Fasteners 🎯 NET SPECIFICATIONS Dimensions: 8.20m (length) × 1.00m (height) Construction: 4 reinforced strips with ropes + brass eyelets 2mm polyethylene wire (100% virgin, UV-treated for longevity) Mesh: 5×5cm Color options: Orange, Blue, or Black 📏 MARKING TAPE SPECIFICATIONS Court size: 8×16m (standard) Material: Polypropylene (CA) Includes: 6 tapes + 6 galvanized iron fasteners Color options: Orange, Blue, or Black ✅ WHY CHOOSE THIS KIT? Tournament-ready setup – Meets official standards Ultra-durable materials – UV-resistant net + weatherproof tape Easy assembly – Pre-measured for quick installation Versatile colors – Match your court’s style ⚠️ WARRANTY Covers manufacturing defects (excludes damage from improper installation, cuts, burns, or chemical exposure). 🏆 PERFECT FOR: Clubs & academies Home court setups Tournament organizers ⚡ Get your official Beach Tennis court ready TODAY!  

Read more less