Amplificador Receiver Multicanal THS 6000 – Taramps O Receiver Multicanal THS 6000, desenvolvido pela Taramps, é a solução perfeita para integrar diferentes ambientes com tecnologia avançada e alta performance. Projetado para ser completo e versátil, ele é ideal para sonorização de lojas, comércios, clínicas, áreas de lazer, espaços gourmet, academias e muito mais, garantindo uma experiência sonora de alta qualidade. Com 400W RMS, o THS 6000 se destaca como o único do segmento a oferecer 4 canais de 100W RMS a 2 ohms, permitindo configurações flexíveis com 4, 3 ou 2 canais. Na configuração de 2 canais em bridge, é possível alcançar 200W RMS a 4 ohms, ampliando ainda mais as possibilidades de uso. Conectividade e Versatilidade O THS 6000 oferece múltiplas opções de entrada de áudio, incluindo: Bluetooth USB Cartão de memória Entrada AUX Entrada óptica Além disso, conta com uma saída Line Out, que permite enviar o sinal de áudio não amplificado para outro equipamento, como um subwoofer ativo, ampliando ainda mais sua capacidade de integração. Aplicações O THS 6000 é compatível com uma variedade de sistemas de som, incluindo: Caixas de som automotivas Caixas Bob Caixas residenciais Caixas trio E muito mais Especificações Técnicas Canais e Potência Número de canais: 4 (configurável em 4, 3 ou 2 canais) Potência RMS total: 400W (4 x 100W) Potência RMS em bridge: 200W a 4 ohms Filtros e Equalização Crossover High Pass (HPF): 100Hz (-12dB/8ª) fixo – ideal para reduzir graves em alto-falantes. Crossover Low Pass (LPF): 100Hz (-12dB/8ª) fixo – perfeito para ajustar subwoofers. Equalizador de 3 vias: Graves (Low): ±12dB a 80Hz Médios (Mid): ±12dB a 2kHz Agudos (High): ±12dB a 10kHz Desempenho e Proteção Tensão de saída RMS: 14,2V RMS por canal / 28,4V RMS em bridge Distorção Harmônica Total (THD + N): <3% a 100W Impedância nominal: 2 ohms por canal / 4 ohms em bridge Resposta em frequência: 15Hz a 20kHz (-3dB) Relação sinal/ruído: >70dB Sistema de proteção: Proteção contra curto-circuito, baixa impedância e superaquecimento. Alimentação e Consumo Tensão de alimentação: 90-140V AC ou 190-240V AC Consumo em stand-by: 3,5W Consumo máximo: 508W Fusível de proteção interno: 6A Rádio FM Faixa de frequência FM: 87,5 MHz a 108 MHz Dimensões e Peso Dimensões (L x A x P): 39,8 x 5,9 x 19,4 cm Peso: 2,20 kg Conteúdo da Embalagem 1 Receiver THS 6000 1 Controle remoto 1 Cabo óptico QR Code para download do manual 1 Adesivo Taramps Recomendações Importantes Recomendamos que a instalação seja realizada por um profissional especializado. A Taramps não se responsabiliza por danos causados pelo mau uso do produto.

Leer Más Menos

Introducing the 12" Woofer Thunder 5K7 by Grupo Taramps, a high-performance driver designed for powerful bass and mid-bass reproduction. Engineered for automotive sound systems (especially trio elétrico setups), this subwoofer delivers deep, intense lows with a premium build and high sound pressure. Key Features: Power Handling: RMS: 2,850W Peak (Program): 5,700W Impedance: 2 or 4 Ohms (dual-configurable) Frequency Response: 50Hz – 2,400Hz (covers bass and mid-bass) Sensitivity: 92.163 dB (1W/1m, free-air) – efficient for high-output systems Xmax (Cone Excursion): ±10mm – good displacement for strong bass Voice Coil: 4" Kapton former, CCAW wire (28mm height) – handles extreme power Magnet Structure: Dual ferrite (220x25mm) + 11,000 Gauss flux density – strong motor force Frame: Aluminum – lightweight yet rigid Weight: 21.1 kg (46.5 lbs) – heavy-duty construction Technical Highlights: BL Factor: 15.819 Tm (high force for tight bass control) Qts (Total Q): 0.454 – optimized for ported/bandpass enclosures Vas (Equivalent Volume): 8.7L – requires a medium-sized enclosure Fs (Resonance Frequency): 84.711 Hz – best for SPL (loudness) applications Recommended Enclosure Volume: 6.4L (for optimal performance) Installation Notes: ⚠️ Professional installation required – ensure compatibility with your amplifier and electrical system.⚠️ Verify impedance (2Ω or 4Ω) and power ratings to avoid damage.⚠️ Best for high-power car audio, sound competitions, or trio elétrico setups. SEO Keywords: 12-inch subwoofer, Thunder 5K7, Taramps subwoofer, 2850W RMS, 5700W peak, 2-ohm sub, car audio woofer, high-power subwoofer, bass driver, SPL subwoofer, trio elétrico speakers, dual ferrite magnet, Kapton voice coil, aluminum frame, loud bass, automotive sound system, low-frequency response, heavy-duty subwoofer, 4-inch voice coil, high-sensitivity sub. Final Thoughts: This Thunder 5K7 12" subwoofer is built for extreme power and durability, making it ideal for bass-heavy applications. Its high sensitivity (92dB) and strong motor structure ensure high output with minimal distortion. Perfect for competitions or high-energy music setups, but requires proper amplification and enclosure tuning for best results. Would you like enclosure recommendations or amplifier pairings? 🚗🔊

Leer Más Menos

Description The TL 1500 amplifier from Taramps is intended for 3-channel car audio systems, and its features follow below: 2 stereo channels (L/R) at 95 Watts RMS, at 2 ohms each, with an active cutoff filter (HPF) at 90Hz to connect the door and trunk cover speakers. 1 SUB channel with 200 Watts RMS at 4 ohms, for subwoofer speakers. This channel is the result of the sum of the channels (L/R) with active cutoff filter (LPF) at 90Hz. It is a stereo amplifier, with a total power of 390 Watts RMS, FULL RANGE, playing all frequencies just the way you like. TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 03 MAXIMUM POWER @ 13.8 VDC - 2 OHMS 2 x 95W RMS (STEREO)@ 13.8 VDC - 4 OHMS 1 x 200W RMS (SUB) INPUT SENSITIVITY Input RCA = 320mVWire Input = 6V SIGNAL TO NOISE RATIO >90dB FREQUENCY RESPONSE Sub Output: 15Hz to 90Hz and its active frequency cut (12dB/8ª)Stereo Output L/R: 90Hz to 30kHz and its active frequency cut (12dB/8ª) BASS BOOST 0 to 10dB @ 50Hz - Adjustable EFFICIENCY 90% INPUT IMPEDANCE 10K OHMS (RCA)1K OHMS (WIRE) PROTECTION SYSTEM Thermal and Output Short MIN. SUPPLY VOLTAGE 9VDC MAXIMUM POWER SUPPLY VOLTAGE 16VDC CONSUMPTION AT REST 0.75A MAXIMUM MUSIC CONSUMPTION 17.5A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 35A DIMENSIONS (WXHXD) 5.43" x 1.93" x 4.76" (138 x 49 x 121mm) WEIGHT 1.32lb (0,60kg) EAN 7898556844772

Leer Más Menos

The TLC 3000 is a long-range remote control designed to be compatible with most players that come with factory-configured remotes. Ideal for devices with rear USB ports, it is suitable for the majority of audio players on the market. It delivers high performance, with control range up to 300 meters in outdoor areas. The system is equipped with security codes that prevent signal copying and retransmission, minimizing external interference thanks to FSK modulation. Additionally, it comes pre-configured and allows synchronization of up to 3 remotes (1 main and 2 spare), ensuring easy installation and use. Technical Specifications: Power Supply Voltage (POWER): Receiver Base: 6 ~ 16VDC Transmitter (Remote): 1.8 ~ 3.6V (CR2032 Battery) Maximum Consumption: Receiver Base: 30mA Transmitter (Remote): 7mA (CR2032 Battery) Modulation: FSK Frequency: 433.92 MHz Maximum Power: +10dBm Weight: Receiver Base: 0.1 kg Transmitter (Remote): 0.1 kg EAN Codes: No cover: 7898556841863 Red: 7898556842464 White: 7898556842440 Black: 7898556842433 Package Contents: 1 Remote Control (Transmitter) 1 Receiver Base 1 Pre-connected 4-wire cable 1 Taramps personalized lanyard

Leer Más Menos

TS 400X4 Car Audio Amplifier The TS 400X4 is a high-performance, multichannel amplifier designed to elevate your car audio experience. With 4 channels delivering 100 Watts RMS each, it offers a maximum power output of 400 Watts RMS at 2 ohms, making it compatible with most car audio systems. This FULL RANGE amplifier ensures exceptional sound quality across all frequencies, from deep bass to crisp highs. Key Features: Thermal and Short-Circuit Protection: Safeguards your amplifier from overheating and electrical issues. LED Indicator: Provides real-time status updates for easy monitoring. Built-in Crossover: Allows precise control over frequency ranges for optimal sound customization. Technical Specifications: Operation Class: Class D (efficient and compact design). Channels: 4. Maximum Power: @ 2 Ohms: 400W RMS (4 x 100W RMS). @ 4 Ohms: 252W RMS (4 x 63W RMS). Bridged @ 4 Ohms: 400W RMS (2 x 200W RMS). Input Sensitivity: 200mV (Vol = max). Signal-to-Noise Ratio: > 90dB (ensures clear, distortion-free audio). Frequency Response: 18 Hz to 30 kHz (-1dB) for full-range performance. Crossover: High Pass Filter (HPF): 90 Hz (-12dB/8th). Low Pass Filter (LPF): 90 Hz (-12dB/8th). Input Impedance: 22K ohms. Output Impedance: 2 ohms. Protection System: Thermal and output short-circuit protection. Voltage Range: 8 VDC (min) to 16 VDC (max). Power Consumption: At Rest: 0.8A. Maximum Music Consumption @13.8VDC: 16.5A. Maximum Sinusoidal Signal Consumption @13.8VDC: 33A. Dimensions: 5.433 x 1.929 x 4.763 inches (138 x 49 x 121 mm). Weight: 1.322 lbs (0.6 kg). EAN: 7898556840682. Why Choose the TS 400X4?The TS 400X4 combines power, precision, and protection in a compact and efficient design. Whether you're looking to enhance your car's audio system or need a reliable amplifier for full-range sound, the TS 400X4 delivers exceptional performance for all your audio needs. Upgrade your car audio experience with the TS 400X4 – where power meets perfection!

Leer Más Menos

Digital Amplifier TS 400×4 Black – Power and Versatility for Your Audio System The demand for digital amplifiers compatible with original players and multimedia devices is growing every day. With this in mind, we developed the TS 400×4 Black, an amplifier with a wired input for 4 individual channels and automatic turn-on, eliminating the need for adapters and making it ideal for this type of application. With 400W of power distributed across 4 channels and bridgeable capability, this amplifier is compatible with various types of speakers, including subwoofers, horns, tweeters, midranges, woofers, mid-bass, and super tweeters. Key Features: ✔ Built-in crossover (HPF, LPF, FULL) – Configures the amplifier’s operating mode.✔ Gain adjustment – Compatible with output levels from most CD/DVD players and multimedia systems on the market.✔ LED power indicator – Shows when the amplifier is on.✔ Wide application – Can be used in cars, trucks, SUVs, motorcycle sound boxes, home audio systems, and more.✔ Versatility – Ideal for installations in doors, trunks, speaker boxes (2-way, 4-way, coaxial, triaxial, quadaxial), and various speaker sizes (4”, 5”, 6”, 6x9”, 5x7”). Technical Specifications: 🔹 Class: D (digital) – High efficiency, compact size, and low heat generation.🔹 Channels: 4 (configurable in 4, 3, or 2 channels).🔹 RMS Power @13.8V: 2 ohms (stereo): 4 x 100W 4 ohms (bridged): 2 x 200W🔹 Minimum impedance: Stereo: 2 ohms Bridged: 4 ohms🔹 Input sensitivity: RCA: 4V (min.) / 250mV (max.) Wire: >10V (min.) / 3V (max.)🔹 Frequency response (Full Range): 18Hz – 30kHz (-3dB)🔹 Filters: LPF (Low Pass Filter): 90Hz (fixed) HPF (High Pass Filter): 90Hz (fixed)🔹 Operating voltage: 8V – 16V🔹 Power consumption: Idle: 0.8A Max (music): 16.5A @13.8V Max (sine wave): 33A @13.8V🔹 Protections: Thermal and short-circuit protection.🔹 Dimensions: 13.8cm (W) x 4.9cm (H) x 13.1cm (D)🔹 Weight: 650g Package Includes: 1 x TS 400×4 Black Amplifier Wired input connector (~20cm cable) QR Code for digital manual Taramps sticker ⚠ Important: We recommend professional installation. We are not responsible for improper use of the product. Upgrade your sound with quality and performance! 🚗🔊

Leer Más Menos

Description It is public knowledge that the demand for amplifiers suitable for factory radios and Multimedia is growing every day.With that in mind, we created the new TS 800×4 2 Ohms with 4-channel high-level individual input and automatic activation. This feature makes it ideal for this type of application, eliminating the need for adapters.With 800 watts of Power distributed in 4 channels and the possibility of connection in Bridge, it can be used with the most varied models of speakers, drivers and super tweeters.In addition, it has the traditional RCA inputs, gain adjustment and fixed Crossover (HPF, LPF and Full), typical feature of Taramps products.Another point to be highlighted is the new power and output connector, which, in addition to being robust, ensures more practicality and safety in the installation.All this and much more, so that your pleasure in listening to music is even greater. Product videos Technical information 2 Ohms VERSION Nominal Power @14.4VDC2 Ohms: 800W RMS (4 x 200W RMS)4 Ohms: 544W RMS (4 x 136W RMS)2 Bridged Channels4 Ohms: 800 W RMS (2 x 400W RMS) Number of Channels 04 Input Sensitivity (RCA): 4V (min.) / 250mV (max.)(WIRE): >10V (min.) / 3V (max.) Signal to Noise Ratio >90dB Frequency Response 10Hz ~ 20KHz (-3dB) Crossover high pass (HPF) 90Hz (-12dB/8ª) Fixed Crossover low pass (LPF) 90Hz (-12dB/8ª) Fixed Input Impedance 10K Ohms (RCA) Output Impedance 2 Ohms protection system Output Short Circuit Minimum Supply Voltage 9VDC Maximum Supply Voltage 16VDC Consumption at rest 0.9A Maximum music consumption 38A Maximum consumption in sinusoidal signal 76A Dimensions (WxHxD) 5.43" x 1.89" x 6.89" (138 x 48 x 175mm) Weight 1.91lb (0.87Kg) EAN 7898556849043

Leer Más Menos

Progressive without formaldehyde Nanoplasty 1 liter + Caviar Web Kit 500g (Deep nutrition) Progressive without formaldehyde Nanoplasty Nanoplasty was developed by Three Therapy for people looking for smoothing or volume reduction and healthy strands, without the use of harmful products such as formaldehyde. In other words, Pantovin Nanoplastia is a formaldehyde-free progressive and has glyoxylic acid as a smoothing base. In addition, it maintains the nutrition and perfect hydration of the hair. That's why it's the best chemical-free progressive! Benefits of chemical-free progressive Nanoplasty: promotes restructuring, volume reduction, cortex realignment and cuticular uniformity. Main Assets: Shea Butter – Provides shine, flexibility and softness. Antioxidant (UVA and UVB), removes dead cells, aids in moisture absorption and retention, softens the scalp, healing and healing power. Polyquaternium 39 – Strengthening film-forming effect, improves the structural integrity of the hair, softening the cuticle and increasing gliding. Likewise, it facilitates dry or wet styling. Hyaluronic Acid – The main “superpower” of hyaluronic acid is its high water retention capacity which is up to a thousand times its weight! And for that reason, the asset is so important in hydrating and maintaining hair health.   Caviar Web Kit Benefits of the Web Caviar Kit: Highly efficient lipid reconstruction, capable of rebuilding the surface of the threads. Therefore, it is used as a nourishing moisturizer, capable of repairing damage in just 60 seconds for a quick and effective treatment. Main Assets: Coconut oil – Rich in vitamin E and fatty acids, it is a powerful moisturizer that acts on the inner portion of the thread, rebuilding it and strengthening it with shine and softness. In addition, it is completely absorbed by the hair or skin. Murumuru –  The main differential is its high power of nutrition and discipline of the wires, it has an emollient and moisturizing effect. It is a powerful nourishing and anti frizz. Gardênia Tahitinensis Flower – Rich in fatty acids, it repairs and restores dry hair, anti-aging effect (enriching hair). Indication: people looking for a quick and effective treatment with a high repairing power, for that hectic day.

Leer Más Menos

BioLiso White Progressive Brush - Thyrre Cosmetics (1000ml) The BioLiso White Progressive Brush line by Thyrre Cosmetics offers a complete solution for those seeking straight, aligned hair with intense shine. Developed with advanced technology and carefully selected ingredients, it provides professional results while delivering comprehensive hair care. Blond BioLiso Anti-Residue Shampoo (1000ml) The Blond BioLiso Anti-Residue Shampoo ensures effective yet gentle cleansing of the scalp, removing accumulated daily residues without damaging the hair. In addition to deep cleaning, it prevents dryness and prepares the hair for the Blond Organic Sealant, opening the cuticles and ensuring optimal absorption of the treatment. How to Use: Apply the shampoo to damp hair. Gently massage the scalp and distribute the product along the entire length of the strands. Rinse thoroughly and repeat the process for better results. Leave it on for up to 20 minutes before the final rinse. BioLiso White Sealant (1000ml) The BioLiso White Sealant is an organic, formaldehyde-free (0%) intelligent treatment that provides highly effective hair realignment. Its exclusive formula combines a blend of acids and Coconut Oil, resulting in frizz-free, shiny, and silky strands. Ideal for all hair types, including bleached, blonde, highlighted, or colored hair. Benefits: Hair Realignment: Achieves straighter, more aligned, and frizz-free hair. Intense Shine: Technology that enhances the hair's natural glow. Deep Hydration: Coconut oil nourishes and repairs the hair, leaving it soft and silky. Safe Formula: Formaldehyde-free to minimize health risks. Strand Test Before applying, it is essential to perform a strand test to ensure the product's compatibility with your hair: Identify a fragile area of the hair. Separate a strand and apply the product as instructed. Evaluate the hair's reaction and the results obtained. Precautions: Do not apply the product if the scalp is irritated or injured. Keep out of reach of children. Discontinue use and seek medical advice if irritation or persistent symptoms occur. Store in a cool place, away from direct sunlight. External Use Only. Contraindications:This product is not recommended for individuals sensitive to any component of its formula. Professional Tips for Best Results: Use Proper Equipment: Always use a professional flat iron certified by regulatory authorities. For Bleached, Blonde, or Colored Hair: Use temperatures up to 200°C (400°F) to avoid fading. For Thick, Rebellious Hair: Use temperatures up to 230°C (450°F) and straighten thin strands, repeating the process 8 to 15 times per section. How to Use: After washing the hair with the Anti-Residue Shampoo, remove excess water with a towel. Divide the hair into four equal sections. Start applying from the nape, keeping 1 cm away from the roots, and apply to thin sections. Leave the product on for up to 1 hour. Rinse about 50% of the product out. Proceed with blow-drying and flat ironing, following the temperature recommended for your hair type. Attention: This product must be applied exclusively by professional hairdressers. Pregnant and breastfeeding women should consult a doctor before use. Protective gloves are mandatory during application. Always perform a strand test before starting the procedure. With the BioLiso White Progressive Brush, you achieve professional results with smooth, frizz-free hair and radiant shine. Trust Thyrre Cosmetics' quality to transform your hair!

Leer Más Menos

Professional Setup for Controllers, Mixers, CDJs, Turntables & Laptops Take your DJ performance to the next level with the TITANIUM RDJ CONTROL, a sleek and lightweight rack designed for the perfect equipment setup. Made from anodized aluminum, this rack is both durable and portable, offering a sturdy yet easy-to-assemble solution for gigs, studios, or clubs. Key Features: ✅ Modular Design – Adjustable "L" support bars for laptops, effects processors, or audio interfaces.✅ MDF Trays with EVA Cushioning – Non-slip, shock-absorbent surfaces for mixers, controllers, CDJs, or turntables.✅ Lightweight & Strong – Aluminum frame supports heavy gear while remaining easy to transport.✅ Optimized Layout – Ergonomic design for smooth transitions and efficient cable management.✅ Universal Compatibility – Fits major brands like Pioneer, Denon, Numark, Hercules, and more (see full list below). Technical Specifications: Height: 47.2 inches Width: 43.3 inches Depth: 15.7 inches Material: Matte aluminum tubing, MDF + EVA padding Weight: Lightweight yet sturdy (exact weight TBD). Recommended Setups: Laptop Stand: Securely mount your notebook on the "L" bar for software control. DJ Gear Setup: MDF trays for 2x CDJs + mixer or a controller + effects unit. Vinyl Ready: Spacious design for turntables (e.g., 2x PLX-1000 + mixer). Compatible Equipment (Partial List): Pioneer: DDJ-1000, CDJ-3000, XDJ-XZ, DJM-900NXS, PLX-1000 Denon: Prime 4, SC6000, X1850 Numark: NS7, Mixtrack Pro FX Hercules: DJControl Impulse 500, RMX2 Turntables: Gemini TT-2000, Audio-Technica LP120 Perfect For: Mobile DJs, club performers, and producers who need a professional, all-in-one stand for hybrid digital/vinyl setups. Why Choose the TITANIUM RDJ CONTROL? Flexible: Adapts to any gear combination. Portable: Quick setup and breakdown for gigs. Sleek Look: Matte aluminum fits any stage or studio. Upgrade your DJ setup today! 🎛️💿

Leer Más Menos

RAV-L Linear Audio & Video Rack – Titanium Series Modular Studio & DJ Rack for Producers, Keyboardists & DJs The RAV-L Titanium Linear Rack is a professional-grade aluminum rack designed to organize audio, video, and music equipment. Its versatile structure is ideal for home studios, stage setups, or mobile configurations. Key Features: Modular & Adjustable Design – Includes MDF trays, VESA mounts, a telescopic keyboard drawer, and 19" side racks. Multi-Equipment Support – Fits keyboards (up to 5 octaves), DJ controllers, mixers, CDJs, turntables, and studio monitors. Integrated Workspace – Features dual 24" VESA monitor mounts, a CPU bar, and a retractable keyboard drawer. 19" Rack Compatible – Holds up to 12 rack units for audio interfaces and processors. Lightweight & Portable – Durable yet easy to disassemble for transport. Technical Specifications: Total Height: 1.2m (47.2") | Base Height: 80cm (31.5") Width: 2.1m (82.7") | Depth: 60cm (23.6") Material: Anodized aluminum tubing + MDF trays Weight Capacity: Supports heavy studio/DJ gear Included Components: MDF trays for controllers, synths, or mixers Adjustable side arms for studio monitors Dual VESA mounts for 24" LCD screens Retractable keyboard drawer (fits 5-octave keyboards) Non-slip CPU bar for PCs/laptops 19" rack rails (12U space) Compatibility (Examples): DJ/Production Gear: Pioneer DDJ-1000, CDJ-3000, XDJ-XZ Denon Prime 4, SC6000 Traktor Kontrol, Komplete keyboards Synths/Keyboards: Roland Fantom, Yamaha MODX, Korg Nautilus Studio Monitors: Yamaha HS5/HS8, KRK Rokit, Mackie MR5 Benefits: All-in-One Solution – Combines DJ, production, and keyboard setups in a single unit. Ergonomic Layout – Optimized for seamless workflow during performances or studio sessions. Easy Assembly – Fully detachable for quick setup and transport. Ideal For: Music producers organizing synths and controllers. DJs using hybrid CDJ/controller setups. Keyboardists needing a stable stand for digital pianos.

Leer Más Menos

Advanced Heat Protection for All Hair Types Shield your hair from heat damage while reducing drying time with TRUSS Amino Thermal Protector, developed in collaboration with renowned designer Alexandre Herchcovitch. This innovative formula seals the hair cuticle, providing softness, shine, frizz control, and effortless styling—whether you're blow-drying, straightening, or curling. Key Benefits: 🔥 Triple Heat Protection – Guards against damage from blow-dryers, flat irons (up to 230°C/450°F).💧 Nano Repair Technology – Forms a protective film to lock in moisture, prevent breakage, and boost elasticity.✨ High-Gloss Finish – Delivers smooth, silky hair with reduced volume and intense shine.🌿 Amino Acid Complex – Repairs protein loss and strengthens strands for resilient, fuller-looking hair.🚫 Weightless Formula – No residue or buildup—ideal for fine or color-treated hair. Active Ingredients: Miracle Oil Blend: Replenishes lipids and amino acids for softness and elasticity. Amisil (Amino + Silicone): Reduces frizz, adds shine, and enhances thermal protection. Keratin (18 Amino Acids): Restores strength and body to damaged hair. How to Use: Section hair and spray evenly (15–20 cm distance). Distribute lightly with fingers or a wide-tooth comb. Style as desired—blow-dry, flat-iron, or curl with 50% less heat damage. Pro Tip: For extra protection, reapply before each heat pass! Why Choose TRUSS Amino? ✅ Dermatologist-Tested – Safe for color-treated, chemically processed, or fragile hair.✅ Signature Design – Exclusive Alexandre Herchcovitch packaging.✅ Salon-Proven Results – Trusted by professionals for smoother, healthier hair. Heat style with confidence—no compromise!

Leer Más Menos