Description Sound Table T 0202, control your sound system with much more tranquility and simplicity. The two input channels, with 4 connections, allow for different mixing possibilities, including: microphone, players, musical instruments (eg keyboard and guitar), etc. With gain and level adjustment on all channels, it allows your gain structure to be impeccable. In addition, to give that special touch to the “regulation”, all channels have tonal equalization in 4 bands (bass, low mid, high mid and high). And the visual indication of each of the channels with LEDs for On, Clipping and Signal could not be missing, also having an output VU where we can guarantee more sound volume without unwanted distortions, guaranteeing a very low level of noise or hiss.Through the two output channels, we can send audio signal to peripherals such as equalizers, audio processors or directly to amplifiers. It is also possible to use the auxiliary output to send audio to other systems, making it possible to control the volume and adjust the phase, correcting possible cancellations.T 0202, quality and control at your fingertips. TECHNICAL INFORMATION EAN 7898556849036 ADDITIONAL INFORMATION Frequency Response (-3dB): 2Hz ~ 76KhzTotal Harmonic Distortion: <0.009% (THD)Signal to Noise Ratio (SNR): 112dBInput Sensitivity:Line (RCA) Min: 840mV~Max 15.6mVLine/MIC (P10) ) Min: 2.65mV ~ Max 44.7mV4 EQ bands per channel:High +15dB (18KHz)Mid High +15dB (2.4KHz)Mid Low +15dB (240Hz)LOW +15dB (30Hz) channels:Line (RCA): Unbalanced 10K OhmsLine/MIC (P10): Unbalanced 2.5K OhmsMax. on inputs without distortion:Line (RCA): 3 VacLine/MIC (P10): 1 VacOutput impedance:Main Out: 47RAux Out: 47RMaximum output level:Main Out: 18 dBu/6.3 VacAux Out: 18 dBu/6.3 VacSupply Voltage (POWER): 9 ~ 16 VdcMaximum Consumption with REM OUT = 0mA: 280 mARemote Input (Connector REM): 9 ~ 16 VdcRemote Output (REM Connector): 350 mADimensions (WxHxD): 120 × 42 x 220 mmWeight: 0.60 Kg

Leer Más Menos

Description With the T 0302 mixer, you can control and mix your sound system with much more peace of mind and simplicity. The 3 input channels, with 8 connections allow several mixing possibilities, among them are: microphone, players, musical instruments (eg keyboard and guitar), and etc. With gain and Level adjustment on all channels, it allows your gain structure to be impeccable. In addition, to give that special touch to the “regulation”, all channels have tonal equalization in 4 bands (bass, low mid, high mid and high). And the visual indication of each of the channels with LEDs for On, Clipping and Signal could not be missing, also having an output VU where we can guarantee more sound volume without unwanted distortions, guaranteeing a very low level of noise or hiss.Through the two output channels, we can send audio signal to peripherals such as equalizers, audio processors or directly to amplifiers. It is also possible to use the auxiliary output to send audio to other systems, making it possible to control the volume and adjust the phase, correcting possible cancellations.T 0302, quality and control at your fingertips. TECHNICAL INFORMATION EAN 7898556848268 ADDITIONAL INFORMATION Frequency Response (-3dB): 2Hz ~ 76KhzTotal Harmonic Distortion: <0.009% (THD)Signal to Noise Ratio (SNR): 112dBChannel 1 Input Sensitivity:Mic (XLR) Min: 500mV ~ Max 7mVLine (P10) Min: 620mV ~ Max 7.6mVSensitivity of channel 2/3 inputs: Line (P10/RCA) Min: 2.55V ~ Max: 60mV4 EQ bands per channel:High +15dB (18KHz)Mid High +15dB ( 2.4KHz)Mid Low +15dB (240Hz)LOW +15dB (30Hz)Channel 1 input impedance:Mic (XRL): Unbalanced 4K OhmsBalanced 8K OhmsLine (P10): Unbalanced 8.5K OhmsBalanced 17KOhmsInput impedance from channel 2:Line (P10): Unbalanced 10K OhmsLine (RCA): Unbalanced 10K OhmsOutput impedance:Main Out (P10/RCA): 47RAux Out (P10/RCA): 47RMaximum output level:Main Out (P10/RCA) : 18 dBu/6.3 VacAux Out (P10/RCA): 18 dBu/6.3 VacSupply Voltage (POWER): 9 ~ 16 VdcMaximum Consumption: 350 mARemote Input (Connector REM): 9 ~ 16 VdcRemote Output (REM Connector): 350 mADimensions (WxHxD): 134 × 42 x 220 mmWeight: 0.70 Kg

Leer Más Menos

Description AT 0302 Player is the first “Table Player” from Taramps. In addition to controlling and mixing your sound system, it is capable of playing your favorite playlist without the need to use a “conventional player”. The integrated Player has a BT connection to connect your smartphone, tablet and other devices. It also has a USB input, FM reception and headphone output. And to make it even better, we included the long-distance remote control, which allows you to increase or decrease the volume, change tracks and folders, among other functions, when using the Player function.Among the product's main applications, we can mention the famous "Bob Boxes" and the most varied automotive sound systems. Simplicity in installation and versatility of use are synonymous with this product. TECHNICAL INFORMATION EAN 7898556849241 ADDITIONAL INFORMATION Frequency Response (-3dB): 2Hz ~ 76KhzTotal Harmonic Distortion: <0.009% (THD)Signal to Noise Ratio (SNR): 112dBChannel 1 Input Sensitivity:Mic (XLR) Min: 500mV ~ Max 7mVLine (P10) Min: 620mV ~ Max 7.6mVChannel 2/3 input sensitivity:Line (P10/RCA) Min: 2.55V ~ Max: 60mV4 EQ bands per channel:High +15dB (12KHz)Mid High +15dB ( 2.5KHz)Mid Low +15dB (300Hz)LOW +15dB (80Hz)Channel 1 input impedance:Mic (XRL): Unbalanced 4K OhmsBalanced 8K OhmsLine (P10): Unbalanced 8.5K OhmsBalanced 17KOhmsInput impedance of channels 2/3:Line (P10): Unbalanced 10K OhmsLine (RCA): Unbalanced 10K OhmsBluetooth Version: 4.0 SBC / A2DPAudio Format: Mp3 / WMAMaximum Bitrate: 320KbpsFM: 87.5MHz to 108MHzEqualization Mode: POP, ROCK, JAZZ, COUNTRY, NORMALRemote control: 433.5MHz 10dBmOutput impedance:Main Out (P10/RCA): 47RAux Out (P10/RCA): 47RMaximum output level:Main Out (P10/RCA): 18 dBu/6.3 VacAux Out (P10/RCA): 18 dBu/6.3 VacSupply Voltage (POWER): 9 ~ 15 VdcMaximum Consumption: 600 mARemote Input (REM Connector): 9 ~ 15 VdcRemote Output (REM Connector): 350 mADimensions (WxHxD): 148 × 42 x 220 mmWeight: 0.75 Kg

Leer Más Menos

Description With the T 0602 mixer, you can control and mix your sound system with much more peace of mind and simplicity. The six input channels, with 16 connections allow several mixing possibilities, among them are: microphone, players, musical instruments (eg keyboard and guitar), etc. With gain and Level adjustment on all channels, it allows your gain structure to be impeccable. In addition, to give that special touch to the “regulation”, all channels have tonal equalization in 4 bands (bass, low mid, high mid and high). And the visual indication of each of the channels with LEDs for On, Clipping and Signal could not be missing, also having an output VU where we can guarantee more sound volume without unwanted distortions, guaranteeing a very low level of noise or hiss.Through the two output channels, we can send audio signal to peripherals such as equalizers, audio processors or directly to amplifiers. It is also possible to use the auxiliary output to send audio to other systems, making it possible to control the volume and adjust the phase, correcting possible cancellations.T 0602, quality and control at your fingertips. TECHNICAL INFORMATION EAN 7898556848282 ADDITIONAL INFORMATION Frequency Response (-3dB): 2Hz ~ 76KhzTotal Harmonic Distortion: <0.009% (THD)Signal-to-Noise Ratio (SNR): 112dBChannel 1 and 2 input sensitivity:Mic (XLR) Min: 500mV ~ Max 7mVLine ( P10) Min: 620mV ~ Max 7.6mVSensitivity of channel 3~6 inputs: Line (P10/RCA) Min: 2.55V ~ Max: 60mV4 EQ bands per channel:High +15dB (18KHz)Mid High + 15dB (2.4KHz)Mid Low +15dB (240Hz)LOW +15dB (30Hz)Impedance of channel 1 and 2 inputs:Mic (XRL): Unbalanced 4K OhmsBalanced 8K OhmsLine (P10): Unbalanced 8.5K OhmsBalanced 17KOhmsImpedance of channel 3~6 inputs:Line (P10): Unbalanced 10K OhmsLine (RCA): Unbalanced 10K OhmsOutput impedance:Main Out (P10/RCA): 47RAux Out (P10/RCA): 47RMaximum output level:Main Out (P10/RCA) : 18 dBu/6.3 VacAux Out (P10/RCA): 18 dBu/6.3 VacSupply Voltage (POWER): 9 ~ 16 VdcMaximum Consumption: 500 mARemote Input (Connector REM): 9 ~ 16 VdcRemote Output (REM connector): 350 mADimensions (WxHxD): 194 × 42 x 220 mmWeight: 0.98 Kg

Leer Más Menos

Description In addition to controlling and mixing your sound system, the T-0602 PLAYER is capable of playing your favorite playlist without the need to use a “conventional player”. The integrated Player has a BT connection to connect your smartphone, tablet and other devices. It also has a USB input, FM reception and headphone output. And to get even better, it has the Echo FX feature, which makes it possible to add the Echo effect to your music or voice. Finally, we have included the long-distance remote control, which allows you to increase or decrease the volume, change tracks and folders, among other functions, when using the Player function.Among the product's main applications, we can mention the famous "Bob Boxes" and the most varied automotive sound systems, for semi-professional and professional use. Simplicity in installation and versatility of use are synonymous with this product. TECHNICAL INFORMATION EAN 7898556849630 ADDITIONAL INFORMATION ADDITIONAL INFORMATIONFrequency Response (-3dB): 2Hz ~ 76KhzTotal Harmonic Distortion: <0.009% (THD)Signal to Noise Ratio (SNR): 112dBChannel 1 and 2 input sensitivity:Mic (XLR) Min: 500mV ~ Max 7mVLine (P10) Min: 620mV ~ Max 7.6mVChannel 3~6 input sensitivity:Line (P10/RCA) Min: 2.55V ~ Max: 60mV4 EQ bands per channel:High +15dB (12KHz)Mid High +15dB (2.5KHz)Mid Low +15dB (300Hz)LOW +15dB (80Hz)Impedance of channel 1 and 2 inputs:Mic (XRL): Unbalanced 4K OhmsBalanced 8K OhmsLine (P10): Unbalanced 8.5K OhmsBalanced 17KOhmsChannel 3~6 input impedance:Line (P10): Unbalanced 10K OhmsLine (RCA): Unbalanced 10K OhmsBluetooth Version: 4.0 SBC / A2DPAudio Format: Mp3 / WMAMaximum Bit Rate: 320KbpsFM: 87.5MHz to 108MHzEqualization mode: POP, ROCK, JAZZ, COUNTRY, NORMALRemote Control: 433.5MHz 10dBmOutput impedance:Main Out (P10/RCA): 47RAux Out (P10/RCA): 47RMaximum output level:Main Out (P10/ RCA): 18 dBu/6.3 VacAux Out (P10/RCA): 18 dBu/6.3 VacSupply Voltage (POWER): 9 ~ 15 VdcMaximum Consumption: 5 mA (standby by) / 670 mA (max )Remote Input (REM Connector): 9 ~ 16 VdcRemote Output (REM Connector): 350 mADimensions (WxHxD): 215 × 42 x 236 mmWeight: 1.16 Kg

Leer Más Menos

Description The DS 1200×4 is synonymous with multichannel amplifier. It has 4 channels of 300 Watts RMS, with a maximum power of 1200 Watts RMS, at 2 ohm and is compatible with any frequency, that is to say, it is a FULL RANGE amp. Versatility, efficiency and quality in a single product. TECHNICAL INFORMATION OPERATION CLASS D NUMBER OF CHANNELS 04 MAXIMUM POWER @ 12.6 VDC - 2 OHMS: 1200W RMS (4 x 300W RMS)@ 12.6 VDC - 4 OHMS: 768W RMS (4 x 192W RMS) INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >88dB FREQUENCY RESPONSE 9Hz to 27KHz (-3dB) CROSSOVER HIGH PASS (HPF) 90Hz (-12dB/8a) Fixed CROSSOVER LOW PASS (LPF) 90Hz (-12dB/8a) Fixed INPUT IMPEDANCE 18K Ohms OUTPUT IMPEDANCE 2 Ohms PROTECTION SYSTEM Output overload MIN. SUPPLY VOLTAGE 9VDC MAXIMUM POWER SUPPLY VOLTAGE 16VDC CONSUMPTION AT REST 1.8A MAXIMUM MUSIC CONSUMPTION @12.6VDC 67.5A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 135A DIMENSIONS (WXHXD) 7.17" x 2.05" x 11.06" (182 x 52 x 281mm) WEIGHT 4.62lb (2,1kg) EAN 7898556844130

Leer Más Menos

Description The DS 2000×4 is a Taramps multi-channel amplifier, carefully designed with the latest technology. It features 4 channels of 500 Watts RMS each, with maximum power of 2000 Watts RMS altogether, at 2 ohms and is suitable for any frequency, that is to say, it is FULL RANGE. Versatility, efficiency and quality in a single Taramps product. TECHNICAL INFORMATION OPERATION CLASS D NUMBER OF CHANNELS 04 MAXIMUM POWER @ 14.4 VDC - 2 Ohms: 2000W RMS (4 x 500W RMS)@ 14.4 VDC - 4 Ohms: 1300W RMS (4 x 325W RMS)2 Bridged Channels (2 x 1000WRMS) at 4 Ohms INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >86dB FREQUENCY RESPONSE 8Hz~20KHz (-3dB) CROSSOVER HIGH PASS (HPF) 90Hz (-12dB/8a) Fixed CROSSOVER LOW PASS (LPF) 90Hz (-12dB/8a) Fixed INPUT IMPEDANCE 18K Ohms PROTECTION SYSTEM Output Overload MIN. SUPPLY VOLTAGE 9VDC MAXIMUM POWER SUPPLY VOLTAGE 17VDC CONSUMPTION AT REST 2.2A MAXIMUM MUSIC CONSUMPTION 100A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 200A DIMENSIONS (WXHXD) 10,55" x 2,83" x 9,64" (268 x 72 x 245mm) WEIGHT 7,42lbs (3,37Kg) EAN 7898556847902

Leer Más Menos

Description The DS 250×2 is designed with a size that fits in your hand. This amplifier was made for those who like to hear the full range of frequencies, bass, mid and high as well, and for that reason, it suits all types of customers and car audio systems. It is stereo, has 2 channels of 125 Watts RMS at 2 ohms or 1 bridged channel with 250 Watts RMS at 4 ohms. The perfect car audio style for you! TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 02 MAXIMUM POWER @ 12.6 VDC - 2 Ohms: 250 Watts RMS (2 x 125W RMS)@ 12.6 VDC - 4 Ohms: 158 Watts RMS (2 x 79W RMS)1 bridgeable channel - @12.6 VDC - 4 Ohms: 250W RMS (1 x 250W RMS) INPUT SENSITIVITY 250mV a 6V SIGNAL TO NOISE RATIO >88dB FREQUENCY RESPONSE 8Hz ~ 35KHz (-3dB) CROSSOVER HIGH PASS (HPF) 80Hz ~ 2.2KHz (-6dB/8th) Variable CROSSOVER LOW PASS (LPF) 80Hz (-12dB/8th) Fixed INPUT IMPEDANCE 10K Ohms OUTPUT IMPEDANCE 2 Ohms PROTECTION SYSTEM Output short circuit MIN. SUPPLY VOLTAGE 9 VDC MAXIMUM POWER SUPPLY VOLTAGE 16 VDC CONSUMPTION AT REST 0.63A MAXIMUM MUSIC CONSUMPTION @12.6 VDC: 15A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 30A DIMENSIONS (WXHXD) 138 x 49 x 121mm WEIGHT 0,46kg EAN 7898556844567

Leer Más Menos

Description Taramps always aims to serve its consumers with the highest technology and versatility. That is how the DS300X4 PLAYER came about, an amplifier with a built-in audio player. It is a FULL RANGE stereo product and comes with a remote control. It has multiple audio inputs, such as Bluetooth. Featuring 4 channels of 75 Watts RMS, totaling 300 Watts RMS, It is widely used in advertising vehicles, in addition to several other types of applications. TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 04 MAXIMUM POWER @ 13.8 VDC - 2 Ohms: 300 Watts RMS (4 x 75W RMS)@ 13.8 VDC - 4 Ohms: 180 Watts RMS (4 x 45W RMS)2 Bridgeable Channels - 4 Ohms: 300 Watts RMS (2 x 150W RMS) INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >90dB FREQUENCY RESPONSE 45Hz ~ 20KHz (-3dB) OUTPUT IMPEDANCE 2 ohms PROTECTION SYSTEM Output Short Circuit MIN. SUPPLY VOLTAGE 9 VDC MAXIMUM POWER SUPPLY VOLTAGE 16 VDC CONSUMPTION AT REST 0.60A MAXIMUM MUSIC CONSUMPTION 14A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 28A DIMENSIONS (WXHXD) 5.43" x 1.93" x 4.72" (138 x 49 x 120mm) WEIGHT 1.36lb (0,62kg) EAN 7898556845144

Leer Más Menos

Description The DS 440×4 is a modern amplifier designed for car audio systems, whether for internal or external. It is a FULL RANGE module and suits the most diverse types of speakers, drivers and tweeters. It features a LED indicating when it is on/off, it is stereo, with a maximum power of 440 Watts RMS split in 4 channels of 110 Watts RMS at 2 ohms each, responding to frequencies between 8Hz ~ 26KHz (-3dB). High technology to play your playlist the way you like it most. TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 04 MAXIMUM POWER @ 12.6 VDC - 2 OHMS: 440W RMS (4 x 110W RMS)@ 12.6 VDC - 4 OHMS: 276W RMS (4 x 69W RMS)2 Bridgeable Channels: @12.6 VDC - 4 OHMS: 440W RMS (2 x 220W RMS) INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >89dB FREQUENCY RESPONSE 8Hz to 26KHz(-3dB) CROSSOVER HIGH PASS (HPF) 90Hz (-12dB/8th) Fixed CROSSOVER LOW PASS (LPF) 90Hz (-12dB/8th) Fixed INPUT IMPEDANCE 18K ohms OUTPUT IMPEDANCE 2 ohms PROTECTION SYSTEM Output Short Circuit MIN. SUPPLY VOLTAGE 8VDC MAXIMUM POWER SUPPLY VOLTAGE 16VDC CONSUMPTION AT REST 0.8A MAXIMUM MUSIC CONSUMPTION @12.6 VDC: 23.5A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 47A DIMENSIONS (WXHXD) 6.30" x 1.73" x 5.71" (160 x 44 x 145mm) WEIGHT 1.32lb (0,60kg) EAN 7898556844338  

Leer Más Menos

Description The DS800X2 was designed for anyone who likes to enjoy all frequency ranges with high definition and technology for car audio systems. It is stereo, with a maximum power of 800 Watts RMS and an impedance of 2 ohms. It has 2 channels of 400 Watts RMS each, or 1 channel connected in BRIDGE with 800 Watts at 4 ohms. The DS 800X2 is FULL RANGE and will certainly play all frequencies the way you like it most. TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 02 MAXIMUM POWER @ 12.6 VDC - 2 OHMS: 800WRMS (2 x 400WRMS)@ 12.6 VDC - 4 OHMS: 500WRMS (2 x 250WRMS)@ 12.6 VDC - 8 OHMS: 240WRMS (2 x 120W)1 Bridgeable CHANNELS: @12.6 VDC - 4 OHMS: 800WRMS (1 x 800WRMS) INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >96dB FREQUENCY RESPONSE 10Hz to 22KHz (-3dB) CROSSOVER HIGH PASS (HPF) 80Hz to 2.2KHz (-6dB/8a) Variable CROSSOVER LOW PASS (LPF) 80Hz (-12dB/8ª) Fixed EFFICIENCY 83% INPUT IMPEDANCE 18K Ohms OUTPUT IMPEDANCE 2 Ohms PROTECTION SYSTEM output overload MIN. SUPPLY VOLTAGE 9VDC MAXIMUM POWER SUPPLY VOLTAGE 16VDC CONSUMPTION AT REST @12.6 VDC: 0.85A MAXIMUM MUSIC CONSUMPTION @12.6 VDC: 38A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 77A DIMENSIONS (WXHXD) 7.24" x 2.13" x 7.48" (173 x 52 x 227mm) WEIGHT 3.04lb (1,43kg) EAN 7898556844048  

Leer Más Menos

Description Taramps designed the DS 800X3 primarily for those who want to use the vehicle original player; this is possible because, in addition to the RCA input, the DS800x3 also has a wired input. With a maximum power of 800 Watts RMS with impedance of 1 and 2 OHMS, it is a 3-channel amplifier, two of them with 200 Watts RMS for playing from mid to treble and the other one is FULL RANGE, with 400 Watts RMS. It is to say, you have countless options in a single product. TECHNICAL INFORMATION OPERATION CLASS Class D NUMBER OF CHANNELS 3 MAXIMUM POWER @ 12.6 VDC: 800W RMS CH1/CH2 (2 x 200W RMS) 1OHM, CH3 (1 x 400W RMS) 2OHMS INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >88dB FREQUENCY RESPONSE CH1/CH2 100Hz ~ 25KHz10Hz ~ 100Hz (LPF = 100Hz)CH3 10Hz ~ 700Hz (LPF = 700Hz)10Hz ~ 25KHz (LPF = OFF) CROSSOVER HIGH PASS (HPF) (CH1 / CH2) 100Hz (-12dB/8ª) Fixed CROSSOVER LOW PASS (LPF) (CH3) 100Hz, 700Hz, OFF (-12dB/8ª) Selectable INPUT IMPEDANCE 10K Ohms (RCA) and 1K Ohms (Wire) OUTPUT IMPEDANCE 1 Ohm PROTECTION SYSTEM Output overload MIN. SUPPLY VOLTAGE 9 VDC MAXIMUM POWER SUPPLY VOLTAGE 16 VDC CONSUMPTION AT REST 1.0A MAXIMUM MUSIC CONSUMPTION @12.6VDC: 51A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 102A DIMENSIONS (WXHXD) 6.81" x 2.05" x 8.94" (173 x 52 x 227mm) WEIGHT 3.15lb (1,43kg) EAN 7898556844949 TECHNICAL INFORMATION OPERATION CLASS D NUMBER OF CHANNELS 3 MAXIMUM POWER @ 12.6 VDC: 800W RMS CH1/CH2 (2 x 200W RMS) 2 OHMS, CH3 (1 x 400W RMS) 4 OHMS INPUT SENSITIVITY 250mV SIGNAL TO NOISE RATIO >88dB FREQUENCY RESPONSE CH1/CH2 100Hz ~ 25KHz10Hz ~ 100Hz (LPF = 100Hz)CH3 10Hz ~ 700Hz (LPF = 700Hz)10Hz ~ 25KHz (LPF = OFF) CROSSOVER HIGH PASS (HPF) (CH1 / CH2) 100Hz (-12dB/8ª) Fixed CROSSOVER LOW PASS (LPF) (CH3) 100Hz, 700Hz, OFF (-12dB/8ª) Selectable INPUT IMPEDANCE 10K Ohms (RCA) and 1K Ohms (Wire) OUTPUT IMPEDANCE 2 Ohms PROTECTION SYSTEM Output overload MIN. SUPPLY VOLTAGE 9VDC MAXIMUM POWER SUPPLY VOLTAGE 16VDC CONSUMPTION AT REST 1.4A MAXIMUM MUSIC CONSUMPTION 43A MAXIMUM CONSUMPTION IN SINUSOIDAL SIGNAL 86A DIMENSIONS (WXHXD) 6.81" x 2.05" x 8.94" (173 x 52 x 227mm) WEIGHT 3.15lb (1,43kg) EAN 7898556844956

Leer Más Menos