DetailsThe Redline Charger Source F60A is a high power power supply that makes it possible to power and charge automotive batteries.This model has automatic bivolt input, and an exclusive multimeter, which measures the voltage (voltage) and current being used in the system.In addition, as a main differential, it has a charge indicator, which informs how many% the battery is charged.It has a SCI system, which automatically controls battery charging.Additional InformationAvailability Immediate dispatchFloating Mode YesTotal input power (Watts) 900Output power (Watts) 900Adjustable Output Current YesInput Voltage BivoltOutput Voltage 12.5V to 14.4VApproximate Product Weight (kg) 1,268 Technical specificationsA Source Redline charger 60A is a high power source which enables power feed and charging automobile batteries, providing a maximum current of 60A , and operating in three modes.Slow Charge Mode: Charge the battery in 3 phases, (Elevation, absorption, equalization). Ideal for recharging batteries when they are low on charge, thus obtaining maximum charging efficiency and without generating wear and tear, which increases their useful life;.Auto SCI mode: Mode to be used when the system is on or fast charging the battery (s), as it will maintain maximum power at the output (14.4V) and will enter the pulsed SCI system when the battery (s) ) are loaded, floating;.Output Voltage Mode (Source): Digitally allows the choice of 8 voltage values ​​at the source output (12.6V / 12.8V / 13.0V / 13.2V / 13.8V / 14.0V / 14.2V / 14.4V).The Redline 60A Power Supply has:Current output 60 amps (real);Selectable output voltage 12.6V / 12.8V / 13.0V / 13.2V / 13.8V / 14.0V / 14.2V / 14.4V;Intelligent Charge System (SCI) 13.8 / 14.4 cyclic;Slow Charge System 3 phases (Elevation / Absorption / Equalization);Intelligent Ventilation System - Dynamic control by PWMBi-volt automatic 90 to 140Vac / 170 to 240Vac.Included Items01 Automotive SourceWarranty12 months

Leer Más Menos

BANDA BD400.4 2OHM CAR AUDIO 400W 4CHANNELS 400X4 AMPLIFIER BANDA AUDIOPARTS The 400.4 offers 400Wrms with a configuration of 4 channels of 100Wrms at 2 Ohms each, or 2 channels of 200Wrms 4 Ohms in Bridge. This line is widely used for small systems as it accepts various installation configurations, meeting the most diverse market needs, playing any type of loudspeaker, from Subwoofers to Tweeters. You can equip your mini sound system to ensure daily quality in your tracks. Therefore, the product offers 4 channels with an impedance of 2 ohms and active crossover, in addition to a modern design with a black housing on top. - Operation Class: D - Maximum Power 12.6v @ 2 Ohms: 4 x 100 WRMS - Max Power 12.6v @ 4 Ohms: 4 x 65 WRMS - Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 200 WRMS - Max Power 14.4v @ 2 Ohms: 4 x 140 WRMS - Max Power 14.4v @ 4 Ohms: 4 x 85 WRMS - Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 280 WRMS - Key Active Crossover - Frequency Response: 20Hz to 20kHz - Low Pass LPF: 20Hz - 90Hz @ 12dB/8th - High Pass HPF: 90Hz - 20kHz @ 12B/8A - Band Pass (Flat) - THD: <1% - Input Voltage: 9 - 16V - Recommended fuse: 30A - Maximum Music Consumption: 20A - Power Cables (Min.): 10mm / 9 AWG - Output Cables (Min.): 2 x 1.5mm / 2 x 15 AWG - Signal Noise Ratio > 85dB - Input Sensitivity: 180mV - 3.4V - Input Impedance: 47K Ohms - Weight (Kg): 0.78 - Height (mm): 116 - Width (mm): 127 - Depth (mm): 53 NOTE: Installation of Banda Audioparts Amplifiers must always be carried out by a trained professional.

Leer Más Menos

The BD800.4 offers 800Wrms with a 4-channel configuration of 200Wrms at 2 Ohms each, or 400Wrms at 4 Ohms on each Bridge. This line is widely used for small and medium-sized systems as it accepts various installation configurations, meeting the most diverse needs of the market, playing any type of speaker.TECHNICAL SPECIFICATIONS• Maximum Power 14.4v @ 2 Ohms: 4 x 230 WRMS• Maximum Power 14.4v @ 4 Ohms: 4 x 150 WRMS• Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 460 WRMS• Maximum Power 12. 6v @ 2 Ohms: 4 x 200 WRMS• Maximum Power 12.6v @ 4 Ohms: 4 x 120 WRMS• Maximum Power 12.6v Bridge @ 4 Ohms: 2 x 400 WRMS• Efficiency @ 4 Ohms: 82%• Efficiency @ 2 Ohms: 78%• Input Voltage: 9 - 16V• Input Impedance: 47k Ohms• THD+N: 1.5%• Input Sensitivity: 250mV - 3.4V •Signal to Noise Ratio: 85dB •Frequency Response: 20 to 20kHz (-3dBs)• HPF (Subsonic): 90Hz to 20kHz @ 12dBs/8° Linkwitz-Riley• LPF (Crossover): 20Hz to 90Hz @ 12dBs/8° Linkwitz-Riley• Recommended Fuse: 50 A• Resting Current : 700mA• Maximum Current (sine signal): 80 A• Maximum Current (musical signal): 40 A• Power Cables (min. recommended): 10mm• Output Cables (min. recommended): 2 x 1.5mm / 2 x 15 AWG• Weight (Kg): 0.82• Height (mm): 116• Width (mm): 127• Depth (mm): 53RECOMMENDATIONS BEFORE PURCHASECheck the product's compatibility with your equipment to avoid problems when using! Please check this with your installer or contracted professional before purchase.Check the voltage, power, impedance and other details that could make the installation unfeasible or cause damage to the product or the vehicle or equipment not covered by the warranty.For products that require installation, this must be done by a qualified professional. We are not responsible for misuse or incorrect installation carried out by the user or another unqualified person.

Leer Más Menos

Dynamic Power 2000.4 - Unparalleled Performance and Versatility Unleash the extraordinary with the Dynamic Power 2000.4 amplifier from Banda Audioparts, a true pioneer in the audio world. Standing as the sole amplifier line globally to feature the revolutionary power transfer function between channels, this innovation allows a seamless transfer of up to 60% between channels via a user-friendly app. Elevating convenience further, it incorporates an automatic gain structure, streamlining installation for a faster and easier setup. Fueled by a potent DSP, the amplifier now integrates an advanced Bluetooth processor. Dive into an array of features, including crossover, delay, equalization, channel routing, gains, and bridged/stereo selection. Delivering a commanding 2000 Watts RMS across 4 channels with an impedance range of 1 or 2 Ohms per channel, this amplifier showcases remarkable versatility, accommodating diverse installations with a single unit. Key Features: Power Transfer: Exclusive function for seamless channel power distribution Automatic Gain Structure: Simplifying installation for enhanced user convenience Integrated Bluetooth Processor: Elevates functionality with advanced DSP features Versatile Configuration: Suitable for Subwoofers, Woofers, Mid-Bass, Horns, or Super Tweeters Full-Range Frequency Response: Accommodates any audio project with ease Intuitive App: Configure the internal processor in real-time via Smartphone or Tablet Technical Specifications: 1 Ohm Configuration: Maximum Power 14.4v @ 1 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 2 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 2 Ohms Configuration: Maximum Power 14.4v @ 2 Ohms: 4 x 600 WRMS Maximum Power 14.4v Bridge @ 4 Ohms: 2 x 1250 WRMS Efficiency @ 4 Ohms: 84% Input Voltage: 9 - 15V THD+N: 0.10% Recommended Fuse: 100A Weight (Kg): 3.3 Height (mm): 64 Width (mm): 235 Depth (mm): 226 Comments: 1-year warranty by the manufacturer Illustrative images for representation only Professional installation recommended; not responsible for poor installation or product misuse.

Leer Más Menos

Banda Electra Bass 10K Amplifier Module Power 1 Ohm - 10.000 Watts RMS 2023 The ELECTRA line represents the perfect fusion of power and audio quality for lovers of deep, immersive bass. This amplifier module has been meticulously designed to provide an unparalleled audio experience. Notable Features: Exceptional Frequency Response: With a remarkable frequency response that extends from 22Hz to 1000Hz, the ELECTRA is tuned specifically for subwoofers, bass, and woofers. It excels in reproducing the deepest and most vibrant tones in your audio system. Variable BASS BOOST: The BASS BOOST feature is fully adjustable, ranging from 30 to 80Hz with an increase of up to 12dB. This allows for personalized control over the bass, further enhancing the listening experience. Robust Construction: The ELECTRA is built into a 100% aluminum chassis, ensuring durability and acting as an efficient heat sink to keep the module in excellent condition, even under heavy use. Impedance and Power: This amplifier is capable of delivering 10,000 Watts RMS with a 1-ohm impedance, providing the necessary power to energize your sound system with impressive energy and clarity. Other Technical Specifications: Efficiency at Nominal Impedance: 76% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22 to 1000Hz (-3dB) Subsonic High-Pass Filter (HPF): 22 - 65Hz Low-Pass Crossover (LPF): 80 - 250Hz Variable Bass Boost: 30 - 80Hz up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Music Signal): 500A Maximum Current Draw (Sine Signal): 1000A Minimum Recommended Power Cable: 70mm / 0 AWG Weight (Kg): 9.2 Height (mm): 73 Width (mm): 256 Depth (mm): 452 The ELECTRA 10K @ 1 Ohm Amplifier Module is the ideal choice for those seeking uncompromising power and audio quality, making your listening sessions a truly exceptional audio experience.

Leer Más Menos

Banda Electra Bass 12K Amplifier Audio Car 12.000 Watts RMS 1 ohm The ELECTRA line is meticulously engineered for those in pursuit of unparalleled bass performance. Key Features: Exceptional Frequency Response: Delivering an astounding frequency response ranging from 22Hz to 1000Hz, the ELECTRA is precisely tuned to accentuate subwoofers, bass, and woofers. It excels in reproducing the deepest and most resonant tones in your audio system. Variable BASS BOOST: The adaptable BASS BOOST feature, adjustable between 30 and 80Hz with a remarkable 12dB boost capability, enhances the bass response, taking your audio system's performance to the next level. Robust Chassis Design: Housed within a striking 100% aluminum chassis, the ELECTRA is not only built to withstand the test of time but also serves as an efficient heat dissipater, ensuring optimal performance even under rigorous usage. Impedance and Power: This amplifier delivers an impressive 12,000 Watts RMS with a 1-ohm impedance, providing the substantial power needed to energize your audio system with remarkable clarity. Additional Technical Specifications: Efficiency at Nominal Impedance: 76% Input Voltage: 9 - 15V Input Impedance: 100K Ohms Maximum THD at Full Power: <1.5% Input Sensitivity: 300mV to 8V Signal-to-Noise Ratio: 80dB Frequency Response: 22 to 1000Hz (-3dB) High-Pass Filter (Subsonic): 22 - 65Hz Low-Pass Crossover (LPF): 80 - 250Hz Variable Bass Boost: 30 - 80Hz up to 12dB Recommended Fuse: 600A Standby Current Draw: ~2.5A Maximum Current Draw (Musical Signal): 650A Maximum Current Draw (Sine Signal): 1200A Minimum Recommended Power Cable: 70mm / 0 AWG Weight (Kg): 9.2 Height (mm): 73 Width (mm): 256 Depth (mm): 452 The ELECTRA 12K @ 1 Ohm Amplifier Module is designed for audiophiles who demand superior bass performance, making it the ideal choice to elevate your audio experience to extraordinary heights.

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass . The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 2000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 2600 WRMS Maximum Power 14.4v @ 2 Ohms 2000 WRMS Maximum Power 12.6v @ 1 Ohm 2000 WRMS Maximum Power 12.6v @ 2 Ohms 14800 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 65% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 160mV – 4V Signal to Noise Ratio 70dB Frequency Response (Switch OFF) 5 a 500Hz (-3dBs) Frequency Response 20 a 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsônico) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 100 A Rest Current 2A Maximum Current (sine signal) 220 A Maximum Current (musical signal) 110 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 3.3 Height (mm) 54 Width (mm) 209 Depth (mm) 243

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 3000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 1 Ohm 3600 WRMS Maximum Power 14.4v @ 2 Ohms 2400WRMS Maximum Power 12.6v @ 1 Ohm 3000 WRMS Maximum Power 12.6v @ 2 Ohms 1800 WRMS Efficiency @ 2 Ohms 82% Efficiency @ 1 Ohm 75% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 110mV – 8V Signal to Noise Ratio 82dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 150 A Rest Current 2A Maximum Current (sine signal) 320A Maximum Current (musical signal) 160A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 4.9 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 3000 WRMS with 1 input channel for connection and an impedance of 2 Ohms. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 2 Ohms 3700 WRMS Maximum Power 14.4v @ 4 Ohms 2300 WRMS Maximum Power 12.6v @ 2 Ohms 3000 WRMS Maximum Power 12.6v @ 4 Ohms 1700 WRMS Efficiency @ 4 Ohms 84% Efficiency @ 2 Ohms 80% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 140mV – 8V Signal to Noise Ratio 86dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 150 A Rest Current 2A Maximum Current (sine signal) 315A Maximum Current (musical signal) 155A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 4mm / 2 x 11 AWG Weight (kg) 4.9 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 3000 WRMS with 1 input channel for connection and an impedance of 4 Ohms. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. Technical specifications Maximum Power 14.4v @ 4 Ohms 3700 WRMS Maximum Power 14.4v @ 8 Ohms 2200WRMS Maximum Power 12.6v @ 4 Ohms 3000 WRMS Maximum Power 12.6v @ 8 Ohms 1700 WRMS Efficiency @ 8 Ohms 92% Efficiency @ 4 Ohms 86% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 150mV – 8V Signal to Noise Ratio 80dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 150 A Rest Current 2A Maximum Current (sine signal) 300 A Maximum Current (musical signal) 150 A Power Cables (recommended min.) 21mm / 4 AWG Output Cables (recommended min.) 2 x 2.5mm / 2 x 13 AWG Weight (kg) 4.9 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Leer Más Menos

The ELECTRA line was developed especially for those looking for incomparable bass. It has a frequency response of 5 to 500Hz (-3dBs). Due to this, the ELECTRA will only play Subwoofers , Bass and part of the mid frequencies. The BASS BOOST @ 45Hz feature is a differentiator, further reinforcing the bass of your system. Designed on a 100% aluminum chassis , it works with a power of 5000 WRMS with 1 input channel for connection and an impedance of 1 Ohm. It has very low harmonic distortion (less than 1%) and Clipping indicator, forced ventilation and short circuit protection. Furthermore, it has a bold and clean design, matching any sound system. ELECTRA 5K1 Technical specifications Maximum Power 14.4v @ 1 Ohm 6200WRMS Maximum Power 14.4v @ 2 Ohms 4300WRMS Maximum Power 12.6v @ 1 Ohm 5000WRMS Maximum Power 12.6v @ 2 Ohms 3600 WRMS Efficiency @ 2 Ohms 77% Efficiency @ 1 Ohm 67% Input Voltage 9 – 15V Input Impedance 100K Ohms THD+N 0.10% Input Sensitivity 40mV – 2V Signal to Noise Ratio 90dB Frequency Response (Switch OFF) 5 to 500Hz (-3dBs) Frequency Response 20 to 500Hz (-3dBs) Bass Boost @ 45Hz Variable 0 to +18dBs HPF (Subsonic) 20 to 80Hz @ 12dB/octave Linkwitz-Riley LPF (Crossover) 80 to 500Hz @ 12dB/octave Linkwitz-Riley Recommended Fuse 250 A Rest Current 3.5A Maximum Current (sine signal) 600A Maximum Current (musical signal) 270A Power Cables (recommended min.) 50mm / 0 AWG Output Cables (recommended min.) 2 x 6mm / 2 x 3 AWG Weight (kg) 5.4 Height (mm) 60 Width (mm) 264 Depth (mm) 308

Leer Más Menos